2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Dropsa 1A-0299042C Pump Element
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 펌프 |
| 제품명 | Dropsa 1A-0299042C Pump Element |
| 제품 코드 | 1A-0299042C |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Dropsa의 Dropsa 1A-0299042C Pump Element을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Dropsa 부품을 제공합니다. Dropsa 1A-0299042C Pump Element이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United States1. INTRODUCTION This user’s and maintenance manual refers to a 989 pump series for grease.
It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to
consult it.
To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at
Dropsa SpA.
The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of
hydraulics and electrical systems.
The manufacturer reserves the right to update the product and/or the user’s manual without the obligation to revise
previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.
The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event of
any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.
DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the
non-observance of the information presented in this manual.
Any modification to component parts of the system or the different destination of use of this system or its parts
without prior written authorization from DROPSA S.p.A. will absolve the latter from any responsibility for injury or
damage to persons and/or property and will release them from all obligations arising from the guarantee.
2. GENERAL DESCRIPTION The features which distinguish this pump are:
high performance, simplicity of construction, modularity, The simplicity of construction guarantees long life, reliability and simplified and reduced maintenance. The modularity
of the components allows the system engineer to construct the lubrication unit to meet the specific needs of the
lubrication system it is serving.
3. PRODUCT MACHINE IDENTIFICATION Machine identification yellow label is located on the front side of the reservoir and contains product serial number,
input voltage and details of the operating parameters.
4. TECHNICAL SPECIFICATIONS
TECHNICAL CHARACTERISTICS Pressure 300 Bar ( 4410 psi) 3 Fixed delivery max (pumping Ø6 mm)
10 cm / min (0.55 cu. in/min) 3 Fixed delivery max (pumping Ø8 mm) 17 cm / min (1.03 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 1,4-10 cm / min (0.085 - 0.61 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 2,5-17 cm / min (0.15 - 1.03 cu. in/min)
No. pumpings 1÷3 Capacity reservoir 5 kg. (11 lb) Lubricant Grease Lubricant Viscosity
000 ÷ 2 NLGI Working Temperature + 10° C ÷ + 40° C (+50° ÷ +104° F) Motor Voltage
220/380 V – 50/60 Hz Power absorption 90 W
2
It is recommended that this manual is carefully kept in good condition and is always available to persons requiring to
consult it.
To request further copies, updates or clarifications with respect to this manual contact the Engineering Department at
Dropsa SpA.
The use of the pump referred to in this manual must be entrusted to qualified personnel with a knowledge of
hydraulics and electrical systems.
The manufacturer reserves the right to update the product and/or the user’s manual without the obligation to revise
previous versions. It is however, possible to contact the Engineering Department for the latest revision in use.
The pump, and any accessories mounted on it, should be carefully checked immediately on receipt and in the event of
any discrepancy or complaint the Dropsa SpA Sales Department should be contacted without delay.
DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the
non-observance of the information presented in this manual.
Any modification to component parts of the system or the different destination of use of this system or its parts
without prior written authorization from DROPSA S.p.A. will absolve the latter from any responsibility for injury or
damage to persons and/or property and will release them from all obligations arising from the guarantee.
2. GENERAL DESCRIPTION The features which distinguish this pump are:
high performance, simplicity of construction, modularity, The simplicity of construction guarantees long life, reliability and simplified and reduced maintenance. The modularity
of the components allows the system engineer to construct the lubrication unit to meet the specific needs of the
lubrication system it is serving.
3. PRODUCT MACHINE IDENTIFICATION Machine identification yellow label is located on the front side of the reservoir and contains product serial number,
input voltage and details of the operating parameters.
4. TECHNICAL SPECIFICATIONS
TECHNICAL CHARACTERISTICS Pressure 300 Bar ( 4410 psi) 3 Fixed delivery max (pumping Ø6 mm)
10 cm / min (0.55 cu. in/min) 3 Fixed delivery max (pumping Ø8 mm) 17 cm / min (1.03 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 1,4-10 cm / min (0.085 - 0.61 cu. in/min)
3 Adjustable delivery max (pumping Ø6 mm) 2,5-17 cm / min (0.15 - 1.03 cu. in/min)
No. pumpings 1÷3 Capacity reservoir 5 kg. (11 lb) Lubricant Grease Lubricant Viscosity
000 ÷ 2 NLGI Working Temperature + 10° C ÷ + 40° C (+50° ÷ +104° F) Motor Voltage
220/380 V – 50/60 Hz Power absorption 90 W
2
자주 묻는 질문
Dropsa의 Dropsa 1A-0299042C Pump Element에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Dropsa의 Dropsa 1A-0299042C Pump Element를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Dropsa 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
