2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Dynisco PT462E Cable Assembly
| 브랜드 |  |
| 카테고리 | 어셈블리 |
| 제품명 | Dynisco PT462E Cable Assembly |
| 제품 코드 | PT462E |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Dynisco의 Dynisco PT462E Cable Assembly을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Dynisco 부품을 제공합니다. Dynisco PT462E Cable Assembly이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesPT462E Cable Assembly
Simple Installation, Repeatability And Reliability
Performance Characteristics Combined Error:
Repeatability:
Over Pressure:
Configuration:
Bridge Resistance:
Output:
Zero Balance:
Input Voltage:
Internal Shunt Calibration (R-Cal):
Insulation Resistance:
Temperature & Mechanical Characteristics
±0.5% FSO, (Including Linearity, Repeatability & Hysteresis) ±0.2% FSO 2 x FSO or 35,000 psi
(whichever is less) Four active arm bonded Wheatstone bridge strain gage
Input: 345 Ohms minimum;
Output: 350 Ohms ±10% 3.33 mV/V ±2.0% ±10% full scale 10 Vdc recommended,
12 Vdc maximum
Transducer Diaphragm:
Maximum Diaphragm Temperature:
Zero Shift (due to temperature change):
Electronics Housing:
Maximum Temperature:
Zero Shift (due to temperature change):
Sensitivity Shift (due to temperature change):
Mounting Torque:
Standard Wetted Parts:
750°F (400°C) 25 psi/100°F maximum (45 psi/100°C) 250°F (121°C) ±0.05% full scale/°F maximum
(±0.10% full scale/°C) ±0.02% full scale/°F maximum (±0.04% full scale/°C)
500 inch/lbs. maximum Dymax® coated 15-5 PH SST
80% FSO ±1.0% 1,000 megohms at 50 Vdc
Ordering Guide for PT460E Series X PT46 X E XX X/XX XXX
Temperature Blank = No temperature sensor T = J type thermocouple Transducer Configuration
0 = Rigid stem, no flexible capillary 2 = Rigid stem with flexible capillary
3 = Rigid stem with flexible capillary and temperature sensor Pressure Range (psi)
5C = 0 - 500 7.5C = 0 - 750 1M = 0 - 1,000 1.5M = 0 - 1,500 3M = 0 - 3,000
5M = 0 - 5,000 7.5M = 0 - 7,500 10M = 0 - 10,000 15M = 0 - 15,000 20M = 0 - 20,000
30M = 0 - 30,000
Option Stem Length Blank = No flex 18” = 18”, 46 cm Flex 30” = 30”, 76 cm Flex
Snout Length 3" = 3”, 7.6 cm 6" = 6”, 15 cm 9" = 9”, 23 cm 12" = 12.5”, 32 cm
Standard mating connector Dynisco P/N 711600 or 6-pin mating connector cable assembly. Accuracy may be affected if non-standard
configurations are used. For additional options please consult factory.
Performance Characteristics Combined Error:
Repeatability:
Over Pressure:
Configuration:
Bridge Resistance:
Output:
Zero Balance:
Input Voltage:
Internal Shunt Calibration (R-Cal):
Insulation Resistance:
Temperature & Mechanical Characteristics
±0.5% FSO, (Including Linearity, Repeatability & Hysteresis) ±0.2% FSO 2 x FSO or 35,000 psi
(whichever is less) Four active arm bonded Wheatstone bridge strain gage
Input: 345 Ohms minimum;
Output: 350 Ohms ±10% 3.33 mV/V ±2.0% ±10% full scale 10 Vdc recommended,
12 Vdc maximum
Transducer Diaphragm:
Maximum Diaphragm Temperature:
Zero Shift (due to temperature change):
Electronics Housing:
Maximum Temperature:
Zero Shift (due to temperature change):
Sensitivity Shift (due to temperature change):
Mounting Torque:
Standard Wetted Parts:
750°F (400°C) 25 psi/100°F maximum (45 psi/100°C) 250°F (121°C) ±0.05% full scale/°F maximum
(±0.10% full scale/°C) ±0.02% full scale/°F maximum (±0.04% full scale/°C)
500 inch/lbs. maximum Dymax® coated 15-5 PH SST
80% FSO ±1.0% 1,000 megohms at 50 Vdc
Ordering Guide for PT460E Series X PT46 X E XX X/XX XXX
Temperature Blank = No temperature sensor T = J type thermocouple Transducer Configuration
0 = Rigid stem, no flexible capillary 2 = Rigid stem with flexible capillary
3 = Rigid stem with flexible capillary and temperature sensor Pressure Range (psi)
5C = 0 - 500 7.5C = 0 - 750 1M = 0 - 1,000 1.5M = 0 - 1,500 3M = 0 - 3,000
5M = 0 - 5,000 7.5M = 0 - 7,500 10M = 0 - 10,000 15M = 0 - 15,000 20M = 0 - 20,000
30M = 0 - 30,000
Option Stem Length Blank = No flex 18” = 18”, 46 cm Flex 30” = 30”, 76 cm Flex
Snout Length 3" = 3”, 7.6 cm 6" = 6”, 15 cm 9" = 9”, 23 cm 12" = 12.5”, 32 cm
Standard mating connector Dynisco P/N 711600 or 6-pin mating connector cable assembly. Accuracy may be affected if non-standard
configurations are used. For additional options please consult factory.
자주 묻는 질문
Dynisco의 Dynisco PT462E Cable Assembly에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Dynisco의 Dynisco PT462E Cable Assembly를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Dynisco 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
