Enerpac Rc258 Cylinder

Single-Acting, General Purpose Cylinders RC-Trio
Optional Carrying Handle CHM6 The standard, certified lifting eyes on cylinders weighing
over 55 lbs (RC5010 and heavier models) can be interchanged with optional carrying handle CHM6.
Series
▼ QUICK SELECTION CHART For complete technical information see next page.
Cylinder Capacity tons (maximum)
5 (4.9)
10 (11.2)
15 (15.7)
25 (25.8)
30 (32.4)
50 (55.2)
75 (79.5) 100 (103.1) *
Stroke
Model Number
(inch)
0.63 1.00 3.00 5.00 7.00 9.13 1.00 2.13 4.13 6.13 8.00 10.13 12.00 14.00
1.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 1.00 2.00 4.00 6.25 8.25 10.25
12.25 14.25 8.25 2.00 4.00 6.25 10.25 13.25 6.13 13.13 2.00 6.63 10.25
RC50 RC51 RC53 RC55 * RC57 RC59 RC101 RC102 * RC104 RC106 * RC108 RC1010 *
RC1012 RC1014 RC151 RC152 RC154 * RC156 * RC158 RC1510 RC1512 RC1514 RC251
RC252 * RC254 * RC256 * RC258 RC2510 RC2512 RC2514 * RC308 RC502 RC504 RC506 *
RC5010 RC5013 RC756 RC7513 RC1002 RC1006 RC10010
Cylinder Effective Area
Oil Capacity
Collapsed Height
(in2)
(in3)
(inch)
(lbs)
0.99 0.99 0.99 0.99 0.99 0.99 2.24 2.24 2.24 2.24 2.24 2.24 2.24 2.24 3.14
3.14 3.14 3.14 3.14 3.14 3.14 3.14 5.16 5.16 5.16 5.16 5.16 5.16 5.16 5.16
6.49 11.04 11.04 11.04 11.04 11.04 15.90 15.90 20.63 20.63 20.63
0.62 0.99 2.97 4.95 6.93 9.04 2.24 4.76 9.23 13.70 17.88 22.64 26.82 31.29
3.14 6.28 12.57 18.85 25.13 31.42 37.70 43.98 5.16 10.32 20.64 32.25 42.56
52.88 63.20 73.52 53.56 22.09 44.18 69.03 113.21 146.34 97.49 208.82 41.26
136.77 211.45
1.63 4.34 6.50 8.50 10.75 12.75 3.53 4.78 6.75 9.75 11.75 13.75 15.75 17.75
4.88 5.88 7.88 10.69 12.69 14.69 16.69 18.69 5.50 6.50 8.50 10.75 12.75 14.75
16.75 18.75 15.25 6.94 8.94 11.13 15.13 18.13 11.25 19.38 8.63 14.06 17.69
2.2 2.3 3.3 4.1 5.3 6.1 4.0 5.1 7.2 9.8 12.0 14.0 15.0 18.0 7.2 9.0 11.0
15.0 18.0 21.0 24.0 26.0 13.0 14.0 18.0 22.0 27.0 31.0 36.0 39.0 40.0 33.0
42.0 51.0 70.0 83.0 65.0 130.0 81.00 130.0 160.0
Capacity:
5 - 100 tons Stroke:
0.63 - 14.25 inches Maximum Operating Pressure:
10,000 psi
Think Safety Manufacturer’s rating of load and stroke are maximum safe limits.
Good practice encourages using only 80% of these ratings.
Page:
400
Lightweight Aluminum Cylinders If you need a higher cylinder capacity-to-weight-ratio the RACSeries are the perfect choice.
Page:
18
Gauges Minimize the risk of overloading and ensure long, dependable service from your equipment.
Refer to the System Components Section for a full range of gauges.
Page:
127
Cylinder-Pump Sets All cylinders marked with an * are available as sets (cylinder, gauge, couplers, hose and pump) for
your ordering convenience.
Page:
6
Available as set, see note on this page.
www.enerpac.com
13