2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
- 제품
- Franke Filter
- 필터
- Franke Filter 1137 External Air Filter
Franke Filter 1137 External Air Filter
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 필터 |
| 제품명 | Franke Filter 1137 External Air Filter |
| 제품 코드 | 1137 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Franke Filter의 Franke Filter 1137 External Air Filter을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Franke Filter 부품을 제공합니다. Franke Filter 1137 External Air Filter이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United Statesshut-off-valves
are used in combination with the stand-by vacuum pump and save adjustment work when switching on the second
vacuum pump.
pressure switch
controls vacuum in the lube oil system and reports any emergencies to the control room.
vacuum gauges
show vacuum in the lube oil system.
micro fibre filter cartridges
function according to the coalescence principle and filter the sucked oil mist with the separation efficiency
of 99. 9% at a particle size of 0.1µ. The residual oil is far below the officially stipulated values.
side channel vacuum pump
produces necessary vacuum in the whole lube oil system.
• application possibility in the explosion hazardous area (zone 2, zone 1 according to ATEX)
• applications with 50 Hz/60 Hz, all voltages
• delivery with separate motor possible
• failsafe operation thanks to a stand-by vacuum pump
Oil mist separators from Franke Filter fulfil several requirements in order to
ensure safe operation of your turbine.
At a glance
1. constant vacuum is created in the whole lube oil system
2. emerging oil mist is fully filtered mechanically
3. chemical constitution of lube oil remains preserved
4. filtered oil is led back into the tank
5. legal environmental regulations can be complied with
6. the result is the clean air
Individual manufacture In dialogue with our customers beginning with planning, construction and
through to production we develop a tailor-made oil mist separator. Thanks
to this close cooperation we are able to offer an optimum solution for each
application.
compact and individual The design of the systems allows assembly in the most confined spaces
on gas and steam turbines, gas and diesel engines, turbo compressors, generators, gears, etc. Our team
manufactures and assembles all oil mist separators in our own factory.
Each unit is manufactured for a specific, individual application.
Optional equipment Franke Filter provides an extra range of equipment for further possibilities of adjustment and extension.
For instance, execution of distribution which allows filtering up to four bearings with one oil mist separator.
You can find further extras on pages 8/9 as well as application examples on
pages 12/13.
5
are used in combination with the stand-by vacuum pump and save adjustment work when switching on the second
vacuum pump.
pressure switch
controls vacuum in the lube oil system and reports any emergencies to the control room.
vacuum gauges
show vacuum in the lube oil system.
micro fibre filter cartridges
function according to the coalescence principle and filter the sucked oil mist with the separation efficiency
of 99. 9% at a particle size of 0.1µ. The residual oil is far below the officially stipulated values.
side channel vacuum pump
produces necessary vacuum in the whole lube oil system.
• application possibility in the explosion hazardous area (zone 2, zone 1 according to ATEX)
• applications with 50 Hz/60 Hz, all voltages
• delivery with separate motor possible
• failsafe operation thanks to a stand-by vacuum pump
Oil mist separators from Franke Filter fulfil several requirements in order to
ensure safe operation of your turbine.
At a glance
1. constant vacuum is created in the whole lube oil system
2. emerging oil mist is fully filtered mechanically
3. chemical constitution of lube oil remains preserved
4. filtered oil is led back into the tank
5. legal environmental regulations can be complied with
6. the result is the clean air
Individual manufacture In dialogue with our customers beginning with planning, construction and
through to production we develop a tailor-made oil mist separator. Thanks
to this close cooperation we are able to offer an optimum solution for each
application.
compact and individual The design of the systems allows assembly in the most confined spaces
on gas and steam turbines, gas and diesel engines, turbo compressors, generators, gears, etc. Our team
manufactures and assembles all oil mist separators in our own factory.
Each unit is manufactured for a specific, individual application.
Optional equipment Franke Filter provides an extra range of equipment for further possibilities of adjustment and extension.
For instance, execution of distribution which allows filtering up to four bearings with one oil mist separator.
You can find further extras on pages 8/9 as well as application examples on
pages 12/13.
5
자주 묻는 질문
Franke Filter의 Franke Filter 1137 External Air Filter에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Franke Filter의 Franke Filter 1137 External Air Filter를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Franke Filter 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
