2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Gestra MK35-2S
제품 설명
Gestra의 Gestra MK35-2S을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Gestra 부품을 제공합니다. Gestra MK35-2S이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesSteam Traps MK 35/2S
Data sheet 810739-02 Issue: 03-2024
Thermostatic Steam Trap
MK 35/2S, MK 35/2S3 PN40/CL300
DN 25, NPS 1" Description Thermostatic steam traps with corrosion resistant 5H2 membrane regulator capsule, unaffected by water hammer and with
flat seal. With integral strainer. Installation in any position.
The “H” version discharges the condensate supercooled to approx. 5 K. The superheating of the steam at the membrane
regulator capsule must not exceed 5 °C.
Design
MK 35/2S With two 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1100 kg/h at Δp 5 bar.
MK 35-2S, MK 35-2S3
MK 35/2S3 With three 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1700 kg/h at Δp 5 bar
Fluids The equipment is designed for the following fluids (in accordance with the EU Pressure Equipment Directive or Pressure
Equipment (Safety) Regulations in the UK):
MK 35/2S, MK 35/2S3 ■
Group 2 fluids
Chemical and corrosive influences must be taken into consideration.
Use in potentially explosive atmospheres The equipment does not have its own potential source of ignition (as per ATEX Directive). Please note the following:
Once installed, static electricity may arise between the equipment and the connected system. If the equipment is used in
potentially explosive atmospheres, the plant manufacturer or owner is responsible for discharging or preventing possible
static charge.
If it is possible for fluid to escape, e.g. through actuating mechanisms or leaks in threaded joints, the plant manufacturer or
owner must take this into consideration when dividing the area into zones.
Function
MK 35-2S
The equipment is used for discharging condensate from steam or for venting steam lines.
The condensate is discharged by two or three membrane regulator capsules and associated nozzle holder insert.
Material Component
EN
Body, cover
1.0460
SA105
Screw
1.7225
A193 B7/SA193 B7
Gasket Membrane regulator capsule Other internal parts
MK 35-2S3
Connections ■ ■ ■ ■ ■ ■
Flange EN 1092-1 B1, PN 40 Flange ASME B 16.5, Class 150 RF Flange ASME B 16.5, Class 300 RF
Screwed socket ISO 228-1, G Screwed socket ASME B 16.11, NPT Socket-weld end DIN EN 12760/ASME B 16.11, CL 3000
ASTM/ASME
Graphite/CrNi Hastelloy®/Stainless steel Stainless steel
Thermostatic Steam Trap
MK 35/2S, MK 35/2S3 PN40/CL300
DN 25, NPS 1" Description Thermostatic steam traps with corrosion resistant 5H2 membrane regulator capsule, unaffected by water hammer and with
flat seal. With integral strainer. Installation in any position.
The “H” version discharges the condensate supercooled to approx. 5 K. The superheating of the steam at the membrane
regulator capsule must not exceed 5 °C.
Design
MK 35/2S With two 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1100 kg/h at Δp 5 bar.
MK 35-2S, MK 35-2S3
MK 35/2S3 With three 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1700 kg/h at Δp 5 bar
Fluids The equipment is designed for the following fluids (in accordance with the EU Pressure Equipment Directive or Pressure
Equipment (Safety) Regulations in the UK):
MK 35/2S, MK 35/2S3 ■
Group 2 fluids
Chemical and corrosive influences must be taken into consideration.
Use in potentially explosive atmospheres The equipment does not have its own potential source of ignition (as per ATEX Directive). Please note the following:
Once installed, static electricity may arise between the equipment and the connected system. If the equipment is used in
potentially explosive atmospheres, the plant manufacturer or owner is responsible for discharging or preventing possible
static charge.
If it is possible for fluid to escape, e.g. through actuating mechanisms or leaks in threaded joints, the plant manufacturer or
owner must take this into consideration when dividing the area into zones.
Function
MK 35-2S
The equipment is used for discharging condensate from steam or for venting steam lines.
The condensate is discharged by two or three membrane regulator capsules and associated nozzle holder insert.
Material Component
EN
Body, cover
1.0460
SA105
Screw
1.7225
A193 B7/SA193 B7
Gasket Membrane regulator capsule Other internal parts
MK 35-2S3
Connections ■ ■ ■ ■ ■ ■
Flange EN 1092-1 B1, PN 40 Flange ASME B 16.5, Class 150 RF Flange ASME B 16.5, Class 300 RF
Screwed socket ISO 228-1, G Screwed socket ASME B 16.11, NPT Socket-weld end DIN EN 12760/ASME B 16.11, CL 3000
ASTM/ASME
Graphite/CrNi Hastelloy®/Stainless steel Stainless steel
자주 묻는 질문
Gestra의 Gestra MK35-2S에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Gestra의 Gestra MK35-2S를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Gestra 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
