2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Honsberg UR1-015GMA Flow Switch
기술 데이터시트 / 제품 문서
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Honsberg의 Honsberg UR1-015GMA Flow Switch을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Honsberg 부품을 제공합니다. Honsberg UR1-015GMA Flow Switch이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesFlow switch UR1-...H
Wiring
Wiring 0.225 normally opened
1
2
brown blue (white)
UR1-015HM
UR1-032HM
● Highly reproducible ● Low pressure loss ● Hermetic separation between electrical
and hydraulic component ● Stress-fixing of the switching unit by means of
plastic head
Switching voltage Switching current Switch performance Cable length Ingress
protection Protection class Materials medium-contact
230 V AC 1A 50 VA
Non-mediumcontact materials Weight
POM
Installation location
or 'normally closed'
1
2
brown blue (white)
1.5 m
IP 65 (1PE connection) Brass construction:
CW614N , 1.4301, 1.4571, 1.4310, Hard ferrite, NBR
Stainless steel construction: 1.4305, 1.4571, 1.4301, 1.4310, Hard ferrite, Viton
UR1-015HM / HK: 0.18 kg UR1-032HM / HK: 0.38 kg Standard: horizontal inwards flow; switching
unit not recommended underneath; other installation positions are possible; the installation position affects the switching point and
range.
Characteristics The devices function via the principle of a spring-supported paddle,
and the magnetic triggering of a reed switch.
Ranges The adjustment range is suitable for horizontally decreasing flows.
Measured in DIN 2448 tube with normal wall thickness.
Technical data Switch Nominal width Process connection Switching range Qmax.
Hysteresis Tolerance Pressure resistance Medium temperature Ambient temperature
Media
Reed switch
DN 32..80 brass / stainless steel Screw-in thread G 11/4..G 11/2 or G2“..G3“
23..118 l/min For details see table "Ranges" up to 600 l/min Depending on the switching value, minimum
±0.7 l/min ±15 % of full scale value
PN 25 bar
Types
DN
UR1-015HM
DN 32
DN 40
DN 50
DN 65
DN 80
DN 32
DN 40
DN 50
DN 65
DN 80
UR1-032HM
UR1-015HK UR1-032HK
Adjustment range l/min H2O 23 - 30 33 - 44 38 - 48 60 - 84 81 - 118 23 - 30
33 - 44 38 - 48 60 - 84 81 - 118
Qmax.
recommended 100 150 200 400 600 100 150 200 400 600
-20..+110 °C -20..+70 °C Water, oils (gases and aggressive media available on request)
dsh_fam_ur1-h_en_vs01 V1.01-01
1
Wiring
Wiring 0.225 normally opened
1
2
brown blue (white)
UR1-015HM
UR1-032HM
● Highly reproducible ● Low pressure loss ● Hermetic separation between electrical
and hydraulic component ● Stress-fixing of the switching unit by means of
plastic head
Switching voltage Switching current Switch performance Cable length Ingress
protection Protection class Materials medium-contact
230 V AC 1A 50 VA
Non-mediumcontact materials Weight
POM
Installation location
or 'normally closed'
1
2
brown blue (white)
1.5 m
IP 65 (1PE connection) Brass construction:
CW614N , 1.4301, 1.4571, 1.4310, Hard ferrite, NBR
Stainless steel construction: 1.4305, 1.4571, 1.4301, 1.4310, Hard ferrite, Viton
UR1-015HM / HK: 0.18 kg UR1-032HM / HK: 0.38 kg Standard: horizontal inwards flow; switching
unit not recommended underneath; other installation positions are possible; the installation position affects the switching point and
range.
Characteristics The devices function via the principle of a spring-supported paddle,
and the magnetic triggering of a reed switch.
Ranges The adjustment range is suitable for horizontally decreasing flows.
Measured in DIN 2448 tube with normal wall thickness.
Technical data Switch Nominal width Process connection Switching range Qmax.
Hysteresis Tolerance Pressure resistance Medium temperature Ambient temperature
Media
Reed switch
DN 32..80 brass / stainless steel Screw-in thread G 11/4..G 11/2 or G2“..G3“
23..118 l/min For details see table "Ranges" up to 600 l/min Depending on the switching value, minimum
±0.7 l/min ±15 % of full scale value
PN 25 bar
Types
DN
UR1-015HM
DN 32
DN 40
DN 50
DN 65
DN 80
DN 32
DN 40
DN 50
DN 65
DN 80
UR1-032HM
UR1-015HK UR1-032HK
Adjustment range l/min H2O 23 - 30 33 - 44 38 - 48 60 - 84 81 - 118 23 - 30
33 - 44 38 - 48 60 - 84 81 - 118
Qmax.
recommended 100 150 200 400 600 100 150 200 400 600
-20..+110 °C -20..+70 °C Water, oils (gases and aggressive media available on request)
dsh_fam_ur1-h_en_vs01 V1.01-01
1
자주 묻는 질문
Honsberg의 Honsberg UR1-015GMA Flow Switch에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Honsberg의 Honsberg UR1-015GMA Flow Switch를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Honsberg 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
