2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Ropex PEX-W4 Current Transformer
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 기타 |
| 제품명 | Ropex PEX-W4 Current Transformer |
| 제품 코드 | PEX-W4 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Ropex의 Ropex PEX-W4 Current Transformer을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Ropex 부품을 제공합니다. Ropex PEX-W4 Current Transformer이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesTechnical data Type of construction
Housing for installation in the electrical cabinet Snaps onto a top hat rail (DIN TS35 rail, 35mm) acc. to DIN EN 50022
Dimensions: 60 x 24mm; height: 89mm (incl. terminals)
Power dissipation
Max. 2.0W
Ambient conditions
Max. altitude: 2000m Ambient temperature: +5…+45°C Max. relative humidity: 80% at temperatures up to +31°C, decreasing linearly to
50% relative humidity at +45°C
Degree of protection
IP20
UL file
E464680
Installation
If several units are installed on one top hat rail (DIN TS35 rail), a clearance of at
least 20mm should be allowed between them.
The moving clip required for fastening must be facing down for mounting on a
horizontal top hat rail.
End holders to mechanically fix the current transformer must be fitted at both ends
for mounting on a vertical top hat rail.
Weight
Approx. 0.15kg (incl. connector plug-in parts)
Housing material
Plastic, polycarbonate, UL-90-V0
Connecting cable Type / cross-sections
Rigid or flexible; 0.2…1.5mm² (AWG 24…16) with plug-in connector Plug-in connectors:
Tightening torque: 0.5…0.6Nm (screwdriver: SZS 0.6x3.5mm)
If ferrules are used, they must be crimped in accordance with DIN 46228 and IEC / EN 60947-1.
This is essential for proper electrical contact in the terminals.
!
How to order Current transformer
Page 2
Art. No. 885106
Housing for installation in the electrical cabinet Snaps onto a top hat rail (DIN TS35 rail, 35mm) acc. to DIN EN 50022
Dimensions: 60 x 24mm; height: 89mm (incl. terminals)
Power dissipation
Max. 2.0W
Ambient conditions
Max. altitude: 2000m Ambient temperature: +5…+45°C Max. relative humidity: 80% at temperatures up to +31°C, decreasing linearly to
50% relative humidity at +45°C
Degree of protection
IP20
UL file
E464680
Installation
If several units are installed on one top hat rail (DIN TS35 rail), a clearance of at
least 20mm should be allowed between them.
The moving clip required for fastening must be facing down for mounting on a
horizontal top hat rail.
End holders to mechanically fix the current transformer must be fitted at both ends
for mounting on a vertical top hat rail.
Weight
Approx. 0.15kg (incl. connector plug-in parts)
Housing material
Plastic, polycarbonate, UL-90-V0
Connecting cable Type / cross-sections
Rigid or flexible; 0.2…1.5mm² (AWG 24…16) with plug-in connector Plug-in connectors:
Tightening torque: 0.5…0.6Nm (screwdriver: SZS 0.6x3.5mm)
If ferrules are used, they must be crimped in accordance with DIN 46228 and IEC / EN 60947-1.
This is essential for proper electrical contact in the terminals.
!
How to order Current transformer
Page 2
Art. No. 885106
자주 묻는 질문
Ropex의 Ropex PEX-W4 Current Transformer에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Ropex의 Ropex PEX-W4 Current Transformer를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Ropex 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
