2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Ropex RES-409 / 400VAC Temperature Controller
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 컨트롤러 |
| 제품명 | Ropex RES-409 / 400VAC Temperature Controller |
| 제품 코드 | RES-409 / 400VAC |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Ropex의 Ropex RES-409 / 400VAC Temperature Controller을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Ropex 부품을 제공합니다. Ropex RES-409 / 400VAC Temperature Controller이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesTechnical data
Heatsealing band type and temperature range
All controllers manufactured as of February 2007:
The temperature range and temperature coefficient settings can also be specified
in the ROPEX visualization software ( section 10.12 "Diagnostic interface /
visualization software (as of February 2007)" on page 50) in addition to using the
rotary coding switch (see below) or the CAN interface:
Temperature range:
200°C, 300°C, 400°C or 500°C Temperature coefficient: 400…4000ppm (variable setting range)
Five different ranges can be set with the rotary coding switch:
Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…300°C (e.g. Alloy L)
Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…500°C (e.g. Alloy L)
Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500) Various ranges can be selected via the CAN interface:
Temperature coefficient 1100ppm (e.g. Alloy A20) 0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 780ppm (e.g. Alloy L) 0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 3500ppm (e.g. LEX3500) 0…200°C, 0…300°C, 0…400°C, 0…500°C
All controllers manufactured as of February 2007:
The settings with the rotary coding switch are considered to be the factory setting. This corresponds to CAN message address 8, value 10 (dec)
( section 10.3 "Receiving CAN messages" on page 32).
!
All controllers manufactured up to January 2007:
Six different ranges can be set via the CAN interface:
Temperature coefficient 1100ppm, 0…200°C (e.g. Alloy A20) Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20)
Temperature coefficient 1100ppm, 0…400°C (e.g. Alloy A20) Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20)
Temperature coefficient 3500ppm, 0…200°C (e.g. LEX3500) Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500)
Analog output (actual value) Terminals 17+18
0…10V DC, Imax = 5mA Equivalent to 0…300°C or 0…500°C Accuracy: ±1% add. 50mV
Digital logic levels Terminals 5, 7 (As of February 2007)
LOW (0V): 0…2VDC, electrically isolated
HIGH (24VDC): 12…30VDC (max. current input 6mA) Reverse polarity-protected
Alarm relay Terminals 12, 13, 14
Umax = 30V (DC/AC), Imax = 0.2A, changeover contact, potential-free
Maximum load (primary current of impulse transformer)
Imax = 5A (duty cycle = 100%) Imax = 25A (duty cycle = 20%)
Power dissipation
max. 20W
Page 12
RES-409
Version 1
Heatsealing band type and temperature range
All controllers manufactured as of February 2007:
The temperature range and temperature coefficient settings can also be specified
in the ROPEX visualization software ( section 10.12 "Diagnostic interface /
visualization software (as of February 2007)" on page 50) in addition to using the
rotary coding switch (see below) or the CAN interface:
Temperature range:
200°C, 300°C, 400°C or 500°C Temperature coefficient: 400…4000ppm (variable setting range)
Five different ranges can be set with the rotary coding switch:
Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…300°C (e.g. Alloy L)
Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…500°C (e.g. Alloy L)
Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500) Various ranges can be selected via the CAN interface:
Temperature coefficient 1100ppm (e.g. Alloy A20) 0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 780ppm (e.g. Alloy L) 0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 3500ppm (e.g. LEX3500) 0…200°C, 0…300°C, 0…400°C, 0…500°C
All controllers manufactured as of February 2007:
The settings with the rotary coding switch are considered to be the factory setting. This corresponds to CAN message address 8, value 10 (dec)
( section 10.3 "Receiving CAN messages" on page 32).
!
All controllers manufactured up to January 2007:
Six different ranges can be set via the CAN interface:
Temperature coefficient 1100ppm, 0…200°C (e.g. Alloy A20) Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20)
Temperature coefficient 1100ppm, 0…400°C (e.g. Alloy A20) Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20)
Temperature coefficient 3500ppm, 0…200°C (e.g. LEX3500) Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500)
Analog output (actual value) Terminals 17+18
0…10V DC, Imax = 5mA Equivalent to 0…300°C or 0…500°C Accuracy: ±1% add. 50mV
Digital logic levels Terminals 5, 7 (As of February 2007)
LOW (0V): 0…2VDC, electrically isolated
HIGH (24VDC): 12…30VDC (max. current input 6mA) Reverse polarity-protected
Alarm relay Terminals 12, 13, 14
Umax = 30V (DC/AC), Imax = 0.2A, changeover contact, potential-free
Maximum load (primary current of impulse transformer)
Imax = 5A (duty cycle = 100%) Imax = 25A (duty cycle = 20%)
Power dissipation
max. 20W
Page 12
RES-409
Version 1
자주 묻는 질문
Ropex의 Ropex RES-409 / 400VAC Temperature Controller에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Ropex의 Ropex RES-409 / 400VAC Temperature Controller를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Ropex 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
