2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Ropex UPT-6010 7601000 Temperature Controller
| 브랜드 |  |
| 카테고리 | 컨트롤러 |
| 제품명 | Ropex UPT-6010 7601000 Temperature Controller |
| 제품 코드 | UPT-6010 7601000 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Ropex의 Ropex UPT-6010 7601000 Temperature Controller을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Ropex 부품을 제공합니다. Ropex UPT-6010 7601000 Temperature Controller이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesDevice functions
The start temperature ( section 8.6.12 "Start temperature" on page 32) and the internal device temperature are
available at slot 1, subslot 3. They are read-only values which cannot be written,
Index
Function
0/1
Start temperature
2/3
Device temperature
Default value
Value range
-99 °C
-99…500 °C -60…190 °C
The channel-specific deviations from the calibration data are available at slot 1, subslot 4 ( section 8.5.5 "Master
AUTOCAL (MA)" on page 28). They are read-only values which cannot be changed. The absolute calibration
resistances are available from index 17. At index 16 the value of the passes through the current transformer is
available. This value can also be written and will be stored retentively in the controllers memory with every change.
The correct calculation of the absolute calibration resistances is only possible if the real count of wire passes
through the current transformer is given in this parameter.
!
The indices 16 to 48 are first available as from firmware version 303.
Index
Function
Default value
Value range
0/1
Calibration deviation, channel 0 (in 0.01%)
0
-100.00%…100.00%
2/3
Calibration deviation, channel 1 (in 0.01%)
0
-100.00%…100.00%
4/5
Calibration deviation, channel 2 (in 0.01%)
0
-100.00%…100.00%
6/7
Calibration deviation, channel 3 (in 0.01%)
0
-100.00%…100.00%
8/9
Calibration deviation, channel 4 (in 0.01%)
0
-100.00%…100.00%
10/11
Calibration deviation, channel 5 (in 0.01%)
0
-100.00%…100.00%
12/13
Calibration deviation, channel 6 (in 0.01%)
0
-100.00%…100.00%
14/15
Calibration deviation, channel 7 (in 0.01%)
0
-100.00%…100.00%
Passes through current transformer
1
1…9
17/18
Initial calibration resistance, channel 0 (in 0.1 m
0
0…6553.5 m
19/20
Initial calibration resistance, channel 1 (in 0.1 m
0
0…6553.5 m
21/22
Initial calibration resistance, channel 2 (in 0.1 m
0
0…6553.5 m
23/24
Initial calibration resistance, channel 3 (in 0.1 m
0
0…6553.5 m
25/26
Initial calibration resistance, channel 4 (in 0.1 m
0
0…6553.5 m
27/28
Initial calibration resistance, channel 5 (in 0.1 m
0
0…6553.5 m
29/30
Initial calibration resistance, channel 6 (in 0.1 m
0
0…6553.5 m
31/32
Initial calibration resistance, channel 7 (in 0.1 m
0
0…6553.5 m
33/34
Calibration resistance, channel 0 (in 0.1 m
0
0…6553.5 m
35/36
Calibration resistance, channel 1 (in 0.1 m
0
0…6553.5 m
37/38
Calibration resistance, channel 2 (in 0.1 m
0
0…6553.5 m
16
Version 6
UPT-6010
Page 36
The start temperature ( section 8.6.12 "Start temperature" on page 32) and the internal device temperature are
available at slot 1, subslot 3. They are read-only values which cannot be written,
Index
Function
0/1
Start temperature
2/3
Device temperature
Default value
Value range
-99 °C
-99…500 °C -60…190 °C
The channel-specific deviations from the calibration data are available at slot 1, subslot 4 ( section 8.5.5 "Master
AUTOCAL (MA)" on page 28). They are read-only values which cannot be changed. The absolute calibration
resistances are available from index 17. At index 16 the value of the passes through the current transformer is
available. This value can also be written and will be stored retentively in the controllers memory with every change.
The correct calculation of the absolute calibration resistances is only possible if the real count of wire passes
through the current transformer is given in this parameter.
!
The indices 16 to 48 are first available as from firmware version 303.
Index
Function
Default value
Value range
0/1
Calibration deviation, channel 0 (in 0.01%)
0
-100.00%…100.00%
2/3
Calibration deviation, channel 1 (in 0.01%)
0
-100.00%…100.00%
4/5
Calibration deviation, channel 2 (in 0.01%)
0
-100.00%…100.00%
6/7
Calibration deviation, channel 3 (in 0.01%)
0
-100.00%…100.00%
8/9
Calibration deviation, channel 4 (in 0.01%)
0
-100.00%…100.00%
10/11
Calibration deviation, channel 5 (in 0.01%)
0
-100.00%…100.00%
12/13
Calibration deviation, channel 6 (in 0.01%)
0
-100.00%…100.00%
14/15
Calibration deviation, channel 7 (in 0.01%)
0
-100.00%…100.00%
Passes through current transformer
1
1…9
17/18
Initial calibration resistance, channel 0 (in 0.1 m
0
0…6553.5 m
19/20
Initial calibration resistance, channel 1 (in 0.1 m
0
0…6553.5 m
21/22
Initial calibration resistance, channel 2 (in 0.1 m
0
0…6553.5 m
23/24
Initial calibration resistance, channel 3 (in 0.1 m
0
0…6553.5 m
25/26
Initial calibration resistance, channel 4 (in 0.1 m
0
0…6553.5 m
27/28
Initial calibration resistance, channel 5 (in 0.1 m
0
0…6553.5 m
29/30
Initial calibration resistance, channel 6 (in 0.1 m
0
0…6553.5 m
31/32
Initial calibration resistance, channel 7 (in 0.1 m
0
0…6553.5 m
33/34
Calibration resistance, channel 0 (in 0.1 m
0
0…6553.5 m
35/36
Calibration resistance, channel 1 (in 0.1 m
0
0…6553.5 m
37/38
Calibration resistance, channel 2 (in 0.1 m
0
0…6553.5 m
16
Version 6
UPT-6010
Page 36
자주 묻는 질문
Ropex의 Ropex UPT-6010 7601000 Temperature Controller에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Ropex의 Ropex UPT-6010 7601000 Temperature Controller를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Ropex 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
