2001년부터 산업용 부품 및 엔지니어링 솔루션.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Ropex UPT-640 Temperature Controller
| 브랜드 |  |
| 카테고리 | 컨트롤러 |
| 제품명 | Ropex UPT-640 Temperature Controller |
| 제품 코드 | 미지정 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Ropex의 Ropex UPT-640 Temperature Controller을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Ropex 부품을 제공합니다. Ropex UPT-640 Temperature Controller이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesTemperature Controller
Technical data
5
Technical data
Type of construction
Housing for front panel mounting Dimensions (W x H): 144 x 72mm; depth: 161mm (incl. terminals)
Line voltage
400VAC version: 380VAC -15%…415VAC +10% (equivalent to 323…456VAC) depending on device version ( Kap. 12 „How to order“ auf Seite 53)
Line frequency
47…63Hz, automatic adjustment to frequencies in this range
Heatsealing band type and temperature range
The temperature range and temperature coefficient can be set independently of
one another in the Configuration menu:
Temperature range:
200°C, 300°C, 400°C, 500°C (as of SW revision 102) Temperature coefficient: 400…4000ppm (variable setting range)
Set point selection/ analog input Terminals 20+23
Via the Settings menu in the controller or the electrically isolated analog input:
Input resistance: 40kohms, reverse polarity-protected 0…10VDC, equivalent to 0…300°C or 0…500°C
Analog output (actual value) Terminals 20+24
0…10VDC, Imax = 5mA Equivalent to 0…300°C or 0…500°C Electrically isolated
Accuracy: ±1% add. 50mV
Digital logic levels Terminals 3, 4, 22, 25, 26
LOW (0V): 0…2VDC
HIGH (24VDC): 12…30VDC (max. current input 6mA) Electrically isolated, reverse polarity-protected
START and
RELEASE (CH1) with contact Terminals 2+7 and 2+19
Switching threshold: 3.5VDC, Umax = 5VDC, Imax = 5mA
Switching output for „"Output 1"/ Temp. OK" signal Terminals 20+21
Umax = 30VDC, Imax = 50mA
UON < 2V (saturation voltage) Transistor conductive if the temperature is inside the tolerance band.
Alarm relay Terminals 5+6
Contact, potential-free, Umax = 30V (DC/AC), Imax = 0.2A
Relay K1 Terminals 16, 17, 18
Changeover contact, potential-free, Umax = 240VAC/100VDC, Imax = 1.5A Interference suppression with 47nF / 560ohms for each terminal
Maximum load (primary current of impulse transformer)
Imax = 5A (duty cycle = 100%) Imax = 25A (duty cycle = 20%)
Power dissipation
max. 25W
Display
LC display (green), 4 lines, 20 characters, alternatively:
VF display (blue), 4 lines, 20 characters
Ambient temperature
+5…+45°C
UPT-640 (as of SW 100)
9
5
Technical data
Type of construction
Housing for front panel mounting Dimensions (W x H): 144 x 72mm; depth: 161mm (incl. terminals)
Line voltage
400VAC version: 380VAC -15%…415VAC +10% (equivalent to 323…456VAC) depending on device version ( Kap. 12 „How to order“ auf Seite 53)
Line frequency
47…63Hz, automatic adjustment to frequencies in this range
Heatsealing band type and temperature range
The temperature range and temperature coefficient can be set independently of
one another in the Configuration menu:
Temperature range:
200°C, 300°C, 400°C, 500°C (as of SW revision 102) Temperature coefficient: 400…4000ppm (variable setting range)
Set point selection/ analog input Terminals 20+23
Via the Settings menu in the controller or the electrically isolated analog input:
Input resistance: 40kohms, reverse polarity-protected 0…10VDC, equivalent to 0…300°C or 0…500°C
Analog output (actual value) Terminals 20+24
0…10VDC, Imax = 5mA Equivalent to 0…300°C or 0…500°C Electrically isolated
Accuracy: ±1% add. 50mV
Digital logic levels Terminals 3, 4, 22, 25, 26
LOW (0V): 0…2VDC
HIGH (24VDC): 12…30VDC (max. current input 6mA) Electrically isolated, reverse polarity-protected
START and
RELEASE (CH1) with contact Terminals 2+7 and 2+19
Switching threshold: 3.5VDC, Umax = 5VDC, Imax = 5mA
Switching output for „"Output 1"/ Temp. OK" signal Terminals 20+21
Umax = 30VDC, Imax = 50mA
UON < 2V (saturation voltage) Transistor conductive if the temperature is inside the tolerance band.
Alarm relay Terminals 5+6
Contact, potential-free, Umax = 30V (DC/AC), Imax = 0.2A
Relay K1 Terminals 16, 17, 18
Changeover contact, potential-free, Umax = 240VAC/100VDC, Imax = 1.5A Interference suppression with 47nF / 560ohms for each terminal
Maximum load (primary current of impulse transformer)
Imax = 5A (duty cycle = 100%) Imax = 25A (duty cycle = 20%)
Power dissipation
max. 25W
Display
LC display (green), 4 lines, 20 characters, alternatively:
VF display (blue), 4 lines, 20 characters
Ambient temperature
+5…+45°C
UPT-640 (as of SW 100)
9
자주 묻는 질문
Ropex의 Ropex UPT-640 Temperature Controller에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Ropex의 Ropex UPT-640 Temperature Controller를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Ropex 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
