8071D Panel Mount Controller

SKU 8071D

AMOT Model 8071 Electric PID Valve Controller is a fully programmable PID-based controller which allows for easy system configuration.

Features and Benefits

• Universal inputs- RTDs thermocouple, 0-10V, or standard 4-20mA signal gives maximum system design flexibility
• Available in AC and DC versions to suit a wide range of actuators
• Can be operated in manual mode - easy maintenance and set up
• Max. two programmable analogue outputs
• Two programmable setpoints, two parameter sets
• Four limit comparison
• Two timer functions
• Two self-optimization prodedures
• RS485 interface available as an option

s thermocouple, 0-10V, or standard 4-20mA signal gives maximum system design flexibility

Available in AC and DC versions to suit a wide range of actuators

Can be operated in manual mode - easy maintenance and set up

Max. two programmable analogue outputs

Two programmable setpoints, two parameter sets

Four limit comparison

Two timer functions

Two self-optimization prodedures

RS485 interface available as an option

Electric PID Valve Controllers and SSRs 8071D, 8072E, 47581L001/47581L002
Operation These products are designed for high performance, fully configurable operation, and
are easy to install and set up. The controller is available in two options.
8071D The 8071D is a universal PID controller for use with the AMOT electrically actuated G Valve
range.
The 8071D is a panel mount stand-alone controller, designed to be used with separate
Solid State Relays (SSRs).
8072E
All connections to the 8072E are via DIN rail mounted terminals for ease of installation.
The choice of logic level, SSR and 4-20mA outputs allows a variety of valves to be
connected. The SSR option (see page 5) is used for an electric actuator, such as the EB series, as
used on the AMOT G temperature control valve (see G valve datasheet), and the 4-20mA output
can control either a pneumatic valve, such as the AMOT G valve, or an electric valve fitted with
a positioner.
The 8072E is a stand-alone panel incorporating the 8071D controller. The 8072E is comprised of
an 8071D controller and two SSR’s are included when necessary, pre-wired in a wall mounting,
splash-proof enclosure approved to IP65.
Specification Controller type
Fully configurable PID with digital filtering and selectable parameter sets
Input Universal sensor input

2 or 3 wire RTD, TC, 4-20mA selectable
Input sensing range Selectable as required

Maximum -2000 to +8500C (-3280 to 15620F) Typical setting 00 to 1200C
Supply
AC Versions — 93 to 263 VAC, 48 to 63Hz 13VA max
DC Versions — 20-30VDC, 13VA max
Input accuracy
RTD within 0.05%
TC within 0.25% 4-20mA & 0-10V within 0.1%
Input sampling
50 to 250ms interval (user configurable)
Environmental 00 to +550C operational

Dynamic resolution up to 16 bit -300 to +700C (-220 - 1580F) storage RH<90% (non condensing)
EMC
EN 61326-1 Class B
Solid state relays
50A rated, opto-isolated, zero-cross switching (4758L001) 7A rated, opto-isolated (47581L002)
Alarm Outputs
2 off 3A contacts, 250VAC max
Accreditation Communication
Complies with relevant EU directives
RS422/RS485 option
Datasheet_8071D_8072E_47581_Valve_Controller_SSR_0825_Rev 9
page 2