Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Bartec 07-2911-1321/30 Position Switch
| 브랜드 |  |
| 카테고리 | 스위치 |
| 제품명 | Bartec 07-2911-1321/30 Position Switch |
| 제품 코드 | 07-2911-1321/30 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Bartec의 Bartec 07-2911-1321/30 Position Switch을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Bartec 부품을 제공합니다. Bartec 07-2911-1321/30 Position Switch이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United States03-0330-0160/B-08/2020-ESS-129312
Position switch Aluminium Explosion protection Marking Position switch type 07-2511
ATEX
Ex II 2G Ex db IIC T6, T5 Gb Ex II 2D Ex tb IIIC T80°C, T95°C Db
Certification
EPS 14 ATEX 1766 X
IECEx
Ex db IIC T6, T5 Gb Ex tb IIC T80°C, T95°C Db
Certification
IECEx EPS 14.0092 X
Other approvals and certificates, bartec.com
Operating temperature
-50 °C to +100 °C depending on the model and the materials used
Ambient temperature
T6 to max. +75 °C depending on the rated current
Technical data Electrical data according to
DIN EN 60947-5-1
Rated operating voltage AC 400 V Utilisation category AC-15 4A 250 V AC-15
2A 400 V DC-13 0.15 A 250 V Isolation voltage 400 V
Ambient temperature +40 °C
400 V 250 V 30 V
ohmic load 3A 5A 7A
inductive load cosφ = 0.6 2A 3A 5A
250 V 30 V
ohmic load 0.4 A 7A
inductive load L/R = 3μs 0.03 A 5A
AC switching capacity
– Dimensions and mounting dimensions according to DIN EN 50041
– Compatible with non-Ex DIN limit switches
DC switching capacity
– Different switching elements All dimensions and actuating elements of the Ex d position
switch correspond to the DIN EN 50041 standard. Its 30 x 60 mm mounting dimensions make the switch directly compatible
to the position switch corresponding to the same DIN standard.
The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection
cable Type 07-2511 is mounted as switching element. Different actuators are available for the variety of actuating possibilities.
After the removal of four screws these knobs can be rotated by 90 °C allowing four different directions of actuation. Goldplated contacts are available for the switching of low currents
of voltages. Standard length of the connection cables are 3 m.
BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the
position switch within the Ex area.
BARTEC GmbH Max-Eyth-Str. 16 97980 Bad Mergentheim
Tel.: +49 7931 597 0 Fax: +49 7931 597 119
Further electrical data on request.
Switching elements
see table
Max. switching frequency
1000 h
Mechanical life
>2 x 106 switching cycles depending on plunger operating speed and angle
Electrical life
dependent on load
Electrical connection
Lead 0.75 mm2 HO5VV-F/A05VV-F/ BETAflam
Other cores and leads on request.
Enclosure material
Mail: [email protected] Web: bartec.com
aluminium
Position switch Aluminium Explosion protection Marking Position switch type 07-2511
ATEX
Ex II 2G Ex db IIC T6, T5 Gb Ex II 2D Ex tb IIIC T80°C, T95°C Db
Certification
EPS 14 ATEX 1766 X
IECEx
Ex db IIC T6, T5 Gb Ex tb IIC T80°C, T95°C Db
Certification
IECEx EPS 14.0092 X
Other approvals and certificates, bartec.com
Operating temperature
-50 °C to +100 °C depending on the model and the materials used
Ambient temperature
T6 to max. +75 °C depending on the rated current
Technical data Electrical data according to
DIN EN 60947-5-1
Rated operating voltage AC 400 V Utilisation category AC-15 4A 250 V AC-15
2A 400 V DC-13 0.15 A 250 V Isolation voltage 400 V
Ambient temperature +40 °C
400 V 250 V 30 V
ohmic load 3A 5A 7A
inductive load cosφ = 0.6 2A 3A 5A
250 V 30 V
ohmic load 0.4 A 7A
inductive load L/R = 3μs 0.03 A 5A
AC switching capacity
– Dimensions and mounting dimensions according to DIN EN 50041
– Compatible with non-Ex DIN limit switches
DC switching capacity
– Different switching elements All dimensions and actuating elements of the Ex d position
switch correspond to the DIN EN 50041 standard. Its 30 x 60 mm mounting dimensions make the switch directly compatible
to the position switch corresponding to the same DIN standard.
The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection
cable Type 07-2511 is mounted as switching element. Different actuators are available for the variety of actuating possibilities.
After the removal of four screws these knobs can be rotated by 90 °C allowing four different directions of actuation. Goldplated contacts are available for the switching of low currents
of voltages. Standard length of the connection cables are 3 m.
BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the
position switch within the Ex area.
BARTEC GmbH Max-Eyth-Str. 16 97980 Bad Mergentheim
Tel.: +49 7931 597 0 Fax: +49 7931 597 119
Further electrical data on request.
Switching elements
see table
Max. switching frequency
1000 h
Mechanical life
>2 x 106 switching cycles depending on plunger operating speed and angle
Electrical life
dependent on load
Electrical connection
Lead 0.75 mm2 HO5VV-F/A05VV-F/ BETAflam
Other cores and leads on request.
Enclosure material
Mail: [email protected] Web: bartec.com
aluminium
자주 묻는 질문
Bartec의 Bartec 07-2911-1321/30 Position Switch에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Bartec의 Bartec 07-2911-1321/30 Position Switch를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Bartec 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
