Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Cemb TA-18 Vibration Sensor
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 센서 |
| 제품명 | Cemb TA-18 Vibration Sensor |
| 제품 코드 | TA-18 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Cemb의 Cemb TA-18 Vibration Sensor을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Cemb 부품을 제공합니다. Cemb TA-18 Vibration Sensor이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesVibration Sensor
www.cemb.com
ACCELEROMETER TRANSDUCER
TA-18/S
The TA-18/S transducers seismically measure absolute machine vibrations by directly fastening the vibrating part on the supports.
They provide an output signal directly proportional to the vibration of the
point on which they are fastened. This signal can subsequently be processed by a measuring channel of a CEMB “T” or “N” series device.
The TA-18/S transducers exploit the piezoelectric effect, i.e. the capability
of a material to provide a difference of potential when mechanically stressed.
In this application, a ceramic material subjected to acceleration generates
an electrical signal proportional to the stress ABSOLUTE VIBRATIONS
TECHNICAL CHARACTERISTICS GENERAL Type of measurement
seismic (absolute vibration) piezoelectric
Sensitivity
100 mV/g
Response in frequency
± 3 dB 0,5 ÷ 15000 Hz ± 10 % 2 ÷ 10000 Hz
Vibration direction
any
Dynamic range
± 50 g pk
Transverse sensitivity
<5%
ELECTRICAL Power supply
2÷10 mA - 18÷30 Vdc
Output polarization voltage
10-14 Vdc
Output impedance
< 100 ohm
Outer casing insulation
> 108 ohm
Settling time
< 2,5 sec.
AMBIENT Protection against shocks
5000 g pk
Protection against external agents
IP68
PHYSICAL Weight
90 grammi
Resonance frequency
23 kHz
Outer casing material
AISI 316-L stainless steel
Retaining screw threading
see “dimensions and threads”
Connection
MIL-C-5015 2-pin connector provided
Tightening torque
2.7 to 6.8 Nm
B A L A N C I N G
M A C H I N E S
ACCELEROMETER TRANSDUCER
TA-18/S
The TA-18/S transducers seismically measure absolute machine vibrations by directly fastening the vibrating part on the supports.
They provide an output signal directly proportional to the vibration of the
point on which they are fastened. This signal can subsequently be processed by a measuring channel of a CEMB “T” or “N” series device.
The TA-18/S transducers exploit the piezoelectric effect, i.e. the capability
of a material to provide a difference of potential when mechanically stressed.
In this application, a ceramic material subjected to acceleration generates
an electrical signal proportional to the stress ABSOLUTE VIBRATIONS
TECHNICAL CHARACTERISTICS GENERAL Type of measurement
seismic (absolute vibration) piezoelectric
Sensitivity
100 mV/g
Response in frequency
± 3 dB 0,5 ÷ 15000 Hz ± 10 % 2 ÷ 10000 Hz
Vibration direction
any
Dynamic range
± 50 g pk
Transverse sensitivity
<5%
ELECTRICAL Power supply
2÷10 mA - 18÷30 Vdc
Output polarization voltage
10-14 Vdc
Output impedance
< 100 ohm
Outer casing insulation
> 108 ohm
Settling time
< 2,5 sec.
AMBIENT Protection against shocks
5000 g pk
Protection against external agents
IP68
PHYSICAL Weight
90 grammi
Resonance frequency
23 kHz
Outer casing material
AISI 316-L stainless steel
Retaining screw threading
see “dimensions and threads”
Connection
MIL-C-5015 2-pin connector provided
Tightening torque
2.7 to 6.8 Nm
B A L A N C I N G
M A C H I N E S
자주 묻는 질문
Cemb의 Cemb TA-18 Vibration Sensor에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Cemb의 Cemb TA-18 Vibration Sensor를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Cemb 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
