Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Dropsa 0156060 Grease Pump
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 펌프 |
| 제품명 | Dropsa 0156060 Grease Pump |
| 제품 코드 | 0156060 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Dropsa의 Dropsa 0156060 Grease Pump을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Dropsa 부품을 제공합니다. Dropsa 0156060 Grease Pump이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesMANUAL PUMP Series 156000
\
C har acteristics
FLOW RATE::
3 3.4 cm for each forward and return movement of the lever;
PRESSURE:
30~150 bar (0.5 Mpa);
SETTING THE
INVERTER:
120 bar;
LUBRICANT:
Min. oil 15 cSt Grease (see table);
RESERVOIRS 1.2 and 5 litres/Kg;
PRESSUREGAUGE:
0÷250 bar;
HYDRAULIC
INVERTER:
Equipped with two valves to control the reverse pressure.
Adjustable from 30 to 150 bar;
OUTLET:
3/8” UNI-ISO 228/1 (3/8 Gas.);
RESERVOIR FILLING
CONNECTION:
½” A UNI-ISO 228/1 (1/2 gas.).
Characteristics
Series 156000 manual pumps for oil or grease for lubrications systems Manual pumps for oil and grease for supplying
dual-line lubrication systems, with a flow rate of 3.4 cc.
Complete with hydraulic pressure inverter for the automatic reverse of the lines upon reaching the
set pressure. The pressure can vary from 30 to 150 bar.
The pumps are equipped with a dual effect piston that moves horizontally.
The hardened and lapped steel piston is controlled by valves with small pistons and is
actuated by a lever on the handle with a stub coupling.
By actuating the control lever, one of the two supply lines is pressurised.
After reaching the pressure set using the inverter’s regulation valves, pressurisation inversion is
achieved, indicated by:
a) an increase in resistance of the control lever b) zeroing of the pressure gauge
c) alternating output of the pistons of the pressure regulation valves of the inverter
Dimensions (please refer to the table below)
C
A pplicati ons
Supply of dual-line lubrication systems
450 mm.
A
B
\
C har acteristics
FLOW RATE::
3 3.4 cm for each forward and return movement of the lever;
PRESSURE:
30~150 bar (0.5 Mpa);
SETTING THE
INVERTER:
120 bar;
LUBRICANT:
Min. oil 15 cSt Grease (see table);
RESERVOIRS 1.2 and 5 litres/Kg;
PRESSUREGAUGE:
0÷250 bar;
HYDRAULIC
INVERTER:
Equipped with two valves to control the reverse pressure.
Adjustable from 30 to 150 bar;
OUTLET:
3/8” UNI-ISO 228/1 (3/8 Gas.);
RESERVOIR FILLING
CONNECTION:
½” A UNI-ISO 228/1 (1/2 gas.).
Characteristics
Series 156000 manual pumps for oil or grease for lubrications systems Manual pumps for oil and grease for supplying
dual-line lubrication systems, with a flow rate of 3.4 cc.
Complete with hydraulic pressure inverter for the automatic reverse of the lines upon reaching the
set pressure. The pressure can vary from 30 to 150 bar.
The pumps are equipped with a dual effect piston that moves horizontally.
The hardened and lapped steel piston is controlled by valves with small pistons and is
actuated by a lever on the handle with a stub coupling.
By actuating the control lever, one of the two supply lines is pressurised.
After reaching the pressure set using the inverter’s regulation valves, pressurisation inversion is
achieved, indicated by:
a) an increase in resistance of the control lever b) zeroing of the pressure gauge
c) alternating output of the pistons of the pressure regulation valves of the inverter
Dimensions (please refer to the table below)
C
A pplicati ons
Supply of dual-line lubrication systems
450 mm.
A
B
자주 묻는 질문
Dropsa의 Dropsa 0156060 Grease Pump에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Dropsa의 Dropsa 0156060 Grease Pump를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Dropsa 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
