Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Fife M431027 Web Edge Sensor
기술 데이터시트 / 제품 문서
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Fife의 Fife M431027 Web Edge Sensor을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Fife 부품을 제공합니다. Fife M431027 Web Edge Sensor이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesFIFE DSE-41
DIGITAL ULTRASONIC SENSOR
Because of its compact size and temperature stability, the digital ultrasonic sensor DSE-41 is the ideal solution for
guiding clear films and most opaque webs.
The DSE - 41 uses ultrasonic waves to measure the lateral position of the web material. The proportional band allows
significant guide point adjustment. The DSE - 41 is often used in pairs for centre guiding when web width variations are
limited. The DSE - 41 is insensitive to ambient light and it’s used to guide most of the opaque material and clear films.
When used with acoustically permeable material a calibration between the sensor and the material is necessary.
It is possible to operate the DSE - 41 with either a supply voltage of 12 V or 24 V. The output signal
would automatically be switched over in that case.
In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all
available Fife web guide processors.
In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily
connected to a PLC as well.
The DSE - 41 has a built-in LED display, visible from both sides, and shows directly on the sensor
information about the operating status like for instance the existence of the supply voltage, position of
the edge of the web inside the field of view or error messages.
An optional digital production data acquisition to Fife D-MAXE controller extends the range of
applications for the DSE - 41 inside the digital network environment. Additional sensor data can be provided to
other hardware equipment if the Fife D-MAXE is linked appropriately to the network.
• Insensitive to ambient light
KEY FEATURES
GENERAL SPECIFICATIONS
• Insensitive to electrostatic discharge
Proportional band 7,6 mm
• Low power consumption
Source Ultrasonic 150 kHz Weight 340 g Operating temperature 5 ° - 60 °C
Protection class
IP 54 Power supply 10 - 28 V
Output signal 0 - 10 mA 4 - 20 mA optional digital data exchange RS-485 Linearity
5 % maximum error (at 10 % to 90 % of signal) Plane change 5 % maximum error (at 20 % to
80 % of gap width) Temperature drift 5 % maximum error (at 10 °C to 40 °C)
• Temperature stabilized
• It doesn’t affect photosensitive paper or film
• Suitable for thin and clear film or foil
• Can be used for new guiding systems as well as for an upgrade of existing
systems
• Fast, easy and robust mounting due to multiple mounting brackets and sensor positioners
• Can be connected to all available Fife web guide processors
DIGITAL ULTRASONIC SENSOR
Because of its compact size and temperature stability, the digital ultrasonic sensor DSE-41 is the ideal solution for
guiding clear films and most opaque webs.
The DSE - 41 uses ultrasonic waves to measure the lateral position of the web material. The proportional band allows
significant guide point adjustment. The DSE - 41 is often used in pairs for centre guiding when web width variations are
limited. The DSE - 41 is insensitive to ambient light and it’s used to guide most of the opaque material and clear films.
When used with acoustically permeable material a calibration between the sensor and the material is necessary.
It is possible to operate the DSE - 41 with either a supply voltage of 12 V or 24 V. The output signal
would automatically be switched over in that case.
In 12 V supply mode the sensor provides an output signal from 0 to 10 mA and can be connected to all
available Fife web guide processors.
In 24 V supply mode the sensor supplies an output signal between 4 and 20 mA and can be easily
connected to a PLC as well.
The DSE - 41 has a built-in LED display, visible from both sides, and shows directly on the sensor
information about the operating status like for instance the existence of the supply voltage, position of
the edge of the web inside the field of view or error messages.
An optional digital production data acquisition to Fife D-MAXE controller extends the range of
applications for the DSE - 41 inside the digital network environment. Additional sensor data can be provided to
other hardware equipment if the Fife D-MAXE is linked appropriately to the network.
• Insensitive to ambient light
KEY FEATURES
GENERAL SPECIFICATIONS
• Insensitive to electrostatic discharge
Proportional band 7,6 mm
• Low power consumption
Source Ultrasonic 150 kHz Weight 340 g Operating temperature 5 ° - 60 °C
Protection class
IP 54 Power supply 10 - 28 V
Output signal 0 - 10 mA 4 - 20 mA optional digital data exchange RS-485 Linearity
5 % maximum error (at 10 % to 90 % of signal) Plane change 5 % maximum error (at 20 % to
80 % of gap width) Temperature drift 5 % maximum error (at 10 °C to 40 °C)
• Temperature stabilized
• It doesn’t affect photosensitive paper or film
• Suitable for thin and clear film or foil
• Can be used for new guiding systems as well as for an upgrade of existing
systems
• Fast, easy and robust mounting due to multiple mounting brackets and sensor positioners
• Can be connected to all available Fife web guide processors
자주 묻는 질문
Fife의 Fife M431027 Web Edge Sensor에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Fife의 Fife M431027 Web Edge Sensor를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Fife 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
