Industrial spare parts & engineering solutions since 2001.
FSG PE 4000-WD/E Tilt Angle Sensor
기술 데이터시트 / 제품 문서
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
FSG의 FSG PE 4000-WD/E Tilt Angle Sensor을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 FSG 부품을 제공합니다. FSG PE 4000-WD/E Tilt Angle Sensor이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United Stateswith oil-damped pendulum systems
Tilt angle values of a platform e.g. on
- cranes and heavy-duty vehicles
- excavators and drilling machines
- ships and offshore facilities
stand for important measuring data as a part of the safety and control system of that type of machinery. Angular measurement is, for instance for equipment levelling, performed in such cases by means of dual axis pendulum systems.
Single axis pendulum systems detect e.g.
- angular positions of a crane jib
- lateral inclination of a vehicle
- orientation of a lifting platform, weir trap or of comparable facilities
Transducers of that type contain inside a robust splash-proof aluminium case of protection degree IP 65 to IP 68 oil-damped pendulum systems, the tilt angle dependant swing of which is measured, depending on the application, either by a potentiometric, non-contact inductive or an optoelectronic angular encoder. For measurements relevant to safety, the pendulum swing per axis is detected with redundancy i.e. by means of two mechanically and electrically independent pendulum systems.
The output signal, representing the tilt angles, is provided either in form of an analog resistance, current or voltage variation or as a digital signal - with interface bus - as well.
For the application as tilt actuated switch e.g. on lifting platforms, crane vehicles or heeling control systems on board of cargo ships, uniaxial transducers can be provided with built-in min/max comparators.
For signal indication and limit monitoring of measured tilt angle values we offer:
- coordinate displays (x/y-indicators)
- min/max-switchgears
- signal converters for signal conversion and monitoring the resultant tilt angle value, derived from x- and y-axis
Resistance on angle limited by stops Resistance tolerance 2) Linearity tolerance 2)
Resolution Capacity Multiple design Functional winding Oilfilling Limit swichtes
Temperature coefficient 1)
• • --
also available with integrated slipping clutch
Series Max. active angle Stops at max.
Resistance on angle limited by stops Resistance tolerance Linearity tolerance
Resolution Capacity Multiple design Temperature coefficient 3)
2)
1)
PW 70 360° 350° min. 50 max. 50 k ±5% ± 0,2 up to 0, 15 % 0,3 up to <0, 1 %
6W sixfold • • version M... only
PW 613 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W sixfold • • • 17 ppm
PW 620 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W sixfold • • •
PW 1023 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W -• ---
constricted resistance and linearity tolerances possible
PW 609/611 340°
PW 613/620 345°
PW 0045 280°..345°
PW 55 345°
340°
345°
280°..345°
345°
min. 25 max. 20 k ±5% ± 0,5 % ± 0,5 % 0,5 W threefold
min. 25 max. 50 k ±5% ± 0,2 % ± 0,2 % 1W sixfold
min. 25 max. 50 k ±5% ± 0,5 % ± 0,2 % 1 ,5 W -17 ppm
min. 25 max. 50 k ±5% ± 0,5 % ± 0,2 % 1 ,5 W stackable
PW45W3/W10 3) W3 1080° W10 3600° W3 1080° W10 3600° min. 25 max. 50 k ±5%
± 0, 1 % 0, 1 up to 0,01 % 2W --
PW45W3 and PW45W10 are multi-turn potentiometers for 3 or 10 turns
Series Max. active angle Stops at max.
Resistance Resistance tolerance Linearity tolerance 4) Resolution Capacity
Multiple design Temperature coefficient 4)
PW 45 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W twofold
± 2° ± 2°
PK 609 340° 340° 1 , 2 or 5 k ± 20 % ± 0,5 %
PK 611 347° 345° 1 , 2 or 5 k ± 20 % ± 0,5 %
PK 613 352° 345° 1 , 2 or 5 k ± 10 % ± 0,2 %
PK 620 355° 345° 1 , 2 or 5 k ± 10 % ± 0, 1 %
PK 1023 355° not limited by stops 1 , 2 or 5 k ± 10 % ± 0, 1 %
0,5 W threefold
0,5 W threefold
1W sixfold 200 ppm
1W sixfold
1W twofold
favourably priced version with ± 1 - 2 % available
Series Voltage output Load resistance Current output Load resistance Supply voltage
Current consumption 4 wires galvanically isolated 2, 3 or 4 wires Temperature coefficient
Linearity General data Temperature coefficient Testing voltage
EMC test according to
PW/PK620-MU PW/PK1023-MU 0–10 and 2–10 V respec.
500 0–20 and 4–20 mA respec.
600 18–33 V DC approx. 80 mA -• • • • • • max. 1 ‰ / 10K, typically: 0,5 ‰ / 10K •
± 0,2 % ± 0, 1 % ± 0, 1 %
PW/PK613-MU --
–30 up to +70 °C 550 V, 50 Hz, 1 min.
DIN 50 081-1 Generic Emission Standard
DIN 50 082-2 Generic Immunity Standard
zero point and steepness to be matched via trimmer mA V
0% mA V
0%
자주 묻는 질문
FSG의 FSG PE 4000-WD/E Tilt Angle Sensor에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 FSG의 FSG PE 4000-WD/E Tilt Angle Sensor를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 FSG 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
