Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Gestra NRS 1-41 Level Switch
| 브랜드 |  |
| 카테고리 | 스위치 |
| 제품명 | Gestra NRS 1-41 Level Switch |
| 제품 코드 | NRS 1-41 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Gestra의 Gestra NRS 1-41 Level Switch을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Gestra 부품을 제공합니다. Gestra NRS 1-41 Level Switch이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesTechnical Data
NRS 141 Type approval no.
TÜV · SWB/SHWS · 12-403 Type examination certificate Input/Output Interface for CAN bus to ISO 11898 CANopen protocol
Output voltage supply for electrode 18 – 36, short-circuit protected Output for control circuit
Two volt-free relay contacts, locally connected in series.
Max. contact rating for switchting voltages 24 V AC/DC, 115 V AC and 230 V AC:
4 A resistive/inductive. Contact material: hard-gold plated (AgNi 0.15) Interference suppression
Provide contactor with external RC combination (100 Ω / 47 nF) Signal output
Photo-MOS output, instantaneous with high level, timed malfunction signal, max. contact rating for
switching voltages 24 V AC, 115 V AC and 230 V AC/DC:
100 mA resistive Relay de-energizing delay Output “High-level alarm”, set to 3 sec. (default), or 15 sec., 25 sec.
internally connected for relay contact test Indicators and adjustors 4 pushbuttons “Parameterisation/TEST”
1 red LED for “High-level alarm electrode” 3 red LEDs “Multifunction” 1 red LED “Bus status”
1 green LED “Power” 1 ten-pole code switch, 7 poles for setting node ID, 3 poles for setting baud rate
1 two-pole code switch, without function.
Internal self-checking routine Every 3 seconds Periodic testing of output relay contacts
Every 6 hours Mains voltage 230 V +/– 10 %, 50/60 Hz, 115 V +/– 10 %, 50/60 Hz (optional)
Power consumption 10 VA Sensitivity ≥ 0.5 µS/cm at 25 °C
8
NRS 141 Type approval no.
TÜV · SWB/SHWS · 12-403 Type examination certificate Input/Output Interface for CAN bus to ISO 11898 CANopen protocol
Output voltage supply for electrode 18 – 36, short-circuit protected Output for control circuit
Two volt-free relay contacts, locally connected in series.
Max. contact rating for switchting voltages 24 V AC/DC, 115 V AC and 230 V AC:
4 A resistive/inductive. Contact material: hard-gold plated (AgNi 0.15) Interference suppression
Provide contactor with external RC combination (100 Ω / 47 nF) Signal output
Photo-MOS output, instantaneous with high level, timed malfunction signal, max. contact rating for
switching voltages 24 V AC, 115 V AC and 230 V AC/DC:
100 mA resistive Relay de-energizing delay Output “High-level alarm”, set to 3 sec. (default), or 15 sec., 25 sec.
internally connected for relay contact test Indicators and adjustors 4 pushbuttons “Parameterisation/TEST”
1 red LED for “High-level alarm electrode” 3 red LEDs “Multifunction” 1 red LED “Bus status”
1 green LED “Power” 1 ten-pole code switch, 7 poles for setting node ID, 3 poles for setting baud rate
1 two-pole code switch, without function.
Internal self-checking routine Every 3 seconds Periodic testing of output relay contacts
Every 6 hours Mains voltage 230 V +/– 10 %, 50/60 Hz, 115 V +/– 10 %, 50/60 Hz (optional)
Power consumption 10 VA Sensitivity ≥ 0.5 µS/cm at 25 °C
8
자주 묻는 질문
Gestra의 Gestra NRS 1-41 Level Switch에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Gestra의 Gestra NRS 1-41 Level Switch를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Gestra 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
