Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Gestra NRS1-52
제품 설명
Gestra의 Gestra NRS1-52을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Gestra 부품을 제공합니다. Gestra NRS1-52이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United StatesLevel Switch NRS 1-52
Data Sheet 819203-03 Issue Date: 09-2024
Level Switch
NRS 1-52
Description
Technical data
The level switch NRS 1-52 in conjunction with level electrodes
NRG 16-.. and ER 5. is used as limit switch, for instance in steam boiler and (pressurized) hot-water installations.
The level switch detects and indicates a MIN and a MAX water level.
The level switch can work with following level electrodes:
NRG 10-52, NRG 16-52, NRG 16-36, NRG 16-4 and ER 5.-1.
Supply voltage 24 VDC, + / –20 %, 0.1 A
Function
NRS 1-52
The operation of the level switch NRS 1-52 is based on the conductive measuring principle using the electrical conductivity of the water for signalling water level. The level switch
is designed for different electrical conductivities and for connecting two level electrodes.
The length of the associated electrode rod determines the
MIN and MAX water level switchpoints.
The level switch detects that the MIN or MAX water level is reached when the corresponding electrode rod is exposed or
submerged. After the de-energizing delay has elapsed, the
MIN or MAX output contact is switched over. At the same time the MIN or MAX LED changes from green to red.
A MIN or MAX alarm can be simulated by pressing the button "Test".
Application in potentially explosive atmospheres Do not use the equipment in potentially explosive atmospheres.
Fuse external 0.5 A (semi-delay) Power consumption 2 VA Connection of level electrode
2 inputs for level electrode NRG 10-52, NRG 16-52,
NRG 16-36, NRG 16-4 and ER 5.-1, 4 poles with screen Sensitivity of response
(Electrical conductivity of water at 25 °C) >0.5 ...< 1000 µS/cm or >10 ...< 10 000 µS/cm
(switch-selectable) Outputs 2 volt-free change-over contacts, 8 A 250 V AC / 30 V DC cos ϕ = 1
De-energizing delay: 3 sec.
Provide inductive loads with RC combinations according to manufacturer's specification to ensure interference
suppression.
Indicators and adjusters 1 pushbutton “Test” for simulating MIN / MAX alarm,
2 red/green LEDs for indicating operating mode and
MIN / MAX alarm, 1 green LED indicating “Power ON”, 1 code switch with 4 poles for changing the sensitivity
Housing Housing material: base: polycarbonate, black Front: polycarbonate, grey.
Terminal strips separately detachable.
Fixing of enclosure: Mounting clip on supporting rail TH 35,
EN 60715 Electrical safety Pollution degree 2.
Protection Housing: IP 40 to EN 60529 Terminal strip: IP 20 to EN 60529 Weight
approx. 0.2 kg Further conditions:
Ambient temperature when system is switched on: 0 ... 55 °C, during operation: –10 ... 55 °C
Transport temperature –20 ... +80 °C (< 100 hours), defrosting time of the
de-energized equipment before it can be put into operation: 24 hours.
Storage temperature –20 ... +70 °C, defrosting time of the de-energized equipment before it can be put into operation: 24 hours.
Relative humidity max. 95%, no moisture condensation
Level Switch
NRS 1-52
Description
Technical data
The level switch NRS 1-52 in conjunction with level electrodes
NRG 16-.. and ER 5. is used as limit switch, for instance in steam boiler and (pressurized) hot-water installations.
The level switch detects and indicates a MIN and a MAX water level.
The level switch can work with following level electrodes:
NRG 10-52, NRG 16-52, NRG 16-36, NRG 16-4 and ER 5.-1.
Supply voltage 24 VDC, + / –20 %, 0.1 A
Function
NRS 1-52
The operation of the level switch NRS 1-52 is based on the conductive measuring principle using the electrical conductivity of the water for signalling water level. The level switch
is designed for different electrical conductivities and for connecting two level electrodes.
The length of the associated electrode rod determines the
MIN and MAX water level switchpoints.
The level switch detects that the MIN or MAX water level is reached when the corresponding electrode rod is exposed or
submerged. After the de-energizing delay has elapsed, the
MIN or MAX output contact is switched over. At the same time the MIN or MAX LED changes from green to red.
A MIN or MAX alarm can be simulated by pressing the button "Test".
Application in potentially explosive atmospheres Do not use the equipment in potentially explosive atmospheres.
Fuse external 0.5 A (semi-delay) Power consumption 2 VA Connection of level electrode
2 inputs for level electrode NRG 10-52, NRG 16-52,
NRG 16-36, NRG 16-4 and ER 5.-1, 4 poles with screen Sensitivity of response
(Electrical conductivity of water at 25 °C) >0.5 ...< 1000 µS/cm or >10 ...< 10 000 µS/cm
(switch-selectable) Outputs 2 volt-free change-over contacts, 8 A 250 V AC / 30 V DC cos ϕ = 1
De-energizing delay: 3 sec.
Provide inductive loads with RC combinations according to manufacturer's specification to ensure interference
suppression.
Indicators and adjusters 1 pushbutton “Test” for simulating MIN / MAX alarm,
2 red/green LEDs for indicating operating mode and
MIN / MAX alarm, 1 green LED indicating “Power ON”, 1 code switch with 4 poles for changing the sensitivity
Housing Housing material: base: polycarbonate, black Front: polycarbonate, grey.
Terminal strips separately detachable.
Fixing of enclosure: Mounting clip on supporting rail TH 35,
EN 60715 Electrical safety Pollution degree 2.
Protection Housing: IP 40 to EN 60529 Terminal strip: IP 20 to EN 60529 Weight
approx. 0.2 kg Further conditions:
Ambient temperature when system is switched on: 0 ... 55 °C, during operation: –10 ... 55 °C
Transport temperature –20 ... +80 °C (< 100 hours), defrosting time of the
de-energized equipment before it can be put into operation: 24 hours.
Storage temperature –20 ... +70 °C, defrosting time of the de-energized equipment before it can be put into operation: 24 hours.
Relative humidity max. 95%, no moisture condensation
자주 묻는 질문
Gestra의 Gestra NRS1-52에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Gestra의 Gestra NRS1-52를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Gestra 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
