Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
KWD EZK 28 Coupling
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
KWD의 KWD EZK 28 Coupling을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 KWD 부품을 제공합니다. KWD EZK 28 Coupling이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United Statesgeneral information
2
Spider Claw hub
technical features A flexible jaw coupling is a positive, torsionally flexible coupling which
also permits radial, axial and angular displacements between the driving and driven parts. It is failsafe.
Two coupling halves with concave claws are located opposite each other, offset circumferentially by half a pitch division. An involute
elastomeric with crowned tooth profile is located in the space between the claws.
The spider insert is extremely wear resistant, to oil, ozone and ageing, and notable for its resistance to tropical conditions. The high
internal damping protects the drive motor from dynamic overload.
The progressively rising spring characteristic ensures that vibration energy is rapidly reduced and limits the vibration amplitude.
In contrast to other flexible couplings, the elastomeric teeth of the spider insert are not subjected to bending stresses, but only to pressure,
thus resulting in lower wear and a higher load capacity for the teeth.
Manufacturing of the couplings from high quality precision castings reduces imbalance and has a positive influence on running
characteristics and service life.
Flexible jaw coupling can be installed both horizontally and vertically. The specially machined surfaces facilitate rapid and reliable
alignment of the coupling on installation.
At an operating temperature of -30 °C to +80 °C (-22 °F to +175 °F) [including short term temperature peaks up to +120 °C (248 °F)],
perfect operation is guaranteed.
Technical changes in the sense of progress are reserved.
2
Spider Claw hub
technical features A flexible jaw coupling is a positive, torsionally flexible coupling which
also permits radial, axial and angular displacements between the driving and driven parts. It is failsafe.
Two coupling halves with concave claws are located opposite each other, offset circumferentially by half a pitch division. An involute
elastomeric with crowned tooth profile is located in the space between the claws.
The spider insert is extremely wear resistant, to oil, ozone and ageing, and notable for its resistance to tropical conditions. The high
internal damping protects the drive motor from dynamic overload.
The progressively rising spring characteristic ensures that vibration energy is rapidly reduced and limits the vibration amplitude.
In contrast to other flexible couplings, the elastomeric teeth of the spider insert are not subjected to bending stresses, but only to pressure,
thus resulting in lower wear and a higher load capacity for the teeth.
Manufacturing of the couplings from high quality precision castings reduces imbalance and has a positive influence on running
characteristics and service life.
Flexible jaw coupling can be installed both horizontally and vertically. The specially machined surfaces facilitate rapid and reliable
alignment of the coupling on installation.
At an operating temperature of -30 °C to +80 °C (-22 °F to +175 °F) [including short term temperature peaks up to +120 °C (248 °F)],
perfect operation is guaranteed.
Technical changes in the sense of progress are reserved.
자주 묻는 질문
KWD의 KWD EZK 28 Coupling에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 KWD의 KWD EZK 28 Coupling를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 KWD 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
