Industrial spare parts & engineering solutions since 2001.
SICK 1111725 type: DBS60E-THFK01024 Incremental encoder
기술 데이터시트 / 제품 문서
- 현재 이 제품에 대한 기술 문서가 없습니다. 자세한 정보는 문의해 주세요.
| 브랜드 |  |
| 카테고리 | 엔코더 |
| 제품명 | SICK 1111725 type: DBS60E-THFK01024 Incremental encoder |
| 제품 코드 | DBS60E-THFK01024 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
SICK의 SICK 1111725 type: DBS60E-THFK01024 Incremental encoder을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 SICK 부품을 제공합니다. SICK 1111725 type: DBS60E-THFK01024 Incremental encoder이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United States- PERFORMANCE
Pulses per revolution 1,024 Measuring step ≤ 90° electric/pulses per revolution Measuring step deviation ± 18° / pulses per revolution Error limits Measuring step deviation x 3 Duty cycle ≤ 0.5 ± 5 % Initialization time < 5 ms 1) - 1) Valid signals can be read once this time has elapsed.
- INTERFACES
Communication interface Incremental Communication Interface detail TTL 1) - 1) Output level depends on the supply voltage.
- ELECTRICAL DATA
Connection type Male connector, M12, 8-pin, radial Power consumption ≤ 0.5 W (without load) Supply voltage 4.5 ... 30 V Load current ≤ 30 mA, per channel Output frequency + 300 kHz 1) Reference signal, number 1 Reference signal, position 90°, electric, logically gated with A and B Reverse polarity protection ✔ Short-circuit protection of the outputs ✔ 2) MTTFd: mean time to dangerous failure 500 years (EN ISO 13849-1) 3) - 1) Up to 450 kHz on request.
- 2) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
- 3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
- MECHANICAL DATA
Mechanical design Through hollow shaft, Front clamp Shaft diameter 15 mm Flange type / stator coupling 2-sided stator coupling, slot, screw hole circle 63–83 mm Weight + 0.25 kg 1) Shaft material Stainless steel Flange material Aluminum Housing material Aluminum Start up torque + 0.5 Ncm (+20 °C) Operating torque 0.4 Ncm (+20 °C) Permissible shaft movement, axial static/dynamic ± 0.5 mm / ± 0.2 mm 2) Permissible shaft movement, radial static/dynamic ± 0.3 mm / ± 0.1 mm 2) Moment of inertia of the rotor 50 gcm² Bearing lifetime 3.6 x 109 revolutions Angular acceleration ≤ 500,000 rad/s² - 1) Based on an encoder with a male connector outlet or a cable with a male connector outlet.
- 2) Not apllicable for stator coupling type C and K.
- AMBIENT DATA
EMC According to EN 61000-6-2 and EN 61000-6-3 Enclosure rating IP65, housing side (according to IEC 60529) 1)
IP65, shaft side (according to IEC 60529)
Permissible relative humidity 90 % (condensation of the optical scanning not permitted) Operating temperature range –30 °C ... +100 °C, at maximum 3,000 pulses per revolution 2) Storage temperature range –40 °C ... +100 °C, without package Resistance to shocks 250 g, 3 ms (according to EN 60068-2-27) Resistance to vibration 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) - 1) With mating connector fitted.
- 2) These values relate to all mechanical versions including recommended accessories unless otherwise noted.
- CLASSIFICATIONS
ECl@ss 5.0 27270501 ECl@ss 5.1.4 27270501 ECl@ss 6.0 27270590 ECl@ss 6.2 27270590 ECl@ss 7.0 27270501 ECl@ss 8.0 27270501 ECl@ss 8.1 27270501 ECl@ss 9.0 27270501 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113
자주 묻는 질문
SICK의 SICK 1111725 type: DBS60E-THFK01024 Incremental encoder에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 SICK의 SICK 1111725 type: DBS60E-THFK01024 Incremental encoder를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 SICK 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
