Industrial spare parts & engineering solutions since 2001.
독일에서 전 세계로 빠른 배송
다양한 결제 방법다양한 결제 옵션
Tschan SV-200 Coupling
기술 데이터시트 / 제품 문서
| 브랜드 |  |
| 카테고리 | 커플링 |
| 제품명 | Tschan SV-200 Coupling |
| 제품 코드 | SV-200 |
저희에게 연락하세요! 영업일 기준 24시간 이내(주말 및 공휴일 제외) 재고 상태와 예상 납기를 안내해 드립니다.
제품 설명
Tschan의 Tschan SV-200 Coupling을(를) 포함한 제품은 병행 수입 채널을 통해 조달되며 United States의 고객에게 신속하고 안정적으로 배송됩니다. Imtek Engineering은 경쟁력 있는 가격으로 정품 Tschan 부품을 제공합니다. Tschan SV-200 Coupling이 당사 웹사이트에 등록되어 있지 않더라도 언제든지 견적을 요청하실 수 있으며, 담당 팀이 신속히 답변 드릴 것입니다.
United States9 Operation When operating the coupling, its specific technical data have to be carefully observed (see
chapter 6 ‘Technical Data’). These values must never be exceeded without the prior written
approval by TSCHAN GmbH.
In order to ensure trouble-free and reliable performance of the coupling, the coupling has to
be designed according to the selection specifications, e.g. according to DIN 740, part 2, (or
acc. to catalogue TSCHAN-S), with a service factor appropriate to the service conditions.
Any change in the service conditions or service parameters always necessitates the verification of the coupling design.
Danger of injuries!
Disconnect the drive before carrying out any work on the coupling!
Secure the drive against unintentional re-start and rotation!
Improperly tightened screws may cause parts to fly off what leads to most serious personal injuries and property damages!
Before putting the coupling into operation, check the alignment and all screwed connections for correct tightening torque and
firm!
Before starting up the equipment, install all protective guards in order to avoid unintentional contact with freely moving or rotating parts.
To avoid sparks, the covers for couplings used should be made of stainless steel!
The covers have to comply with protection type IP2X as a minimum.
The cover shall be designed to prevent dust from depositing on the coupling parts.
The cover must not touch the coupling and impair the proper operation of the coupling.
For equipment group I in mining applications, pay careful attention to the particular hazards that exist when using aluminium parts!
While operating the coupling, pay attention to:
Changes in operation noises Occurring vibrations Attention!
• Disconnect the drive immediately, if any irregularities are observed while operating
the coupling!
• Identify the cause for the problem using table 5 “Operation Faults and Possible Causes“
and correct the fault.
The listed problems are some examples to assist you in troubleshooting.
• All the machinery components and operation modes have to be considered for the
determination and correction of faults!
baws014-gbr-1
TSCHAN-S SV
- 14 -
chapter 6 ‘Technical Data’). These values must never be exceeded without the prior written
approval by TSCHAN GmbH.
In order to ensure trouble-free and reliable performance of the coupling, the coupling has to
be designed according to the selection specifications, e.g. according to DIN 740, part 2, (or
acc. to catalogue TSCHAN-S), with a service factor appropriate to the service conditions.
Any change in the service conditions or service parameters always necessitates the verification of the coupling design.
Danger of injuries!
Disconnect the drive before carrying out any work on the coupling!
Secure the drive against unintentional re-start and rotation!
Improperly tightened screws may cause parts to fly off what leads to most serious personal injuries and property damages!
Before putting the coupling into operation, check the alignment and all screwed connections for correct tightening torque and
firm!
Before starting up the equipment, install all protective guards in order to avoid unintentional contact with freely moving or rotating parts.
To avoid sparks, the covers for couplings used should be made of stainless steel!
The covers have to comply with protection type IP2X as a minimum.
The cover shall be designed to prevent dust from depositing on the coupling parts.
The cover must not touch the coupling and impair the proper operation of the coupling.
For equipment group I in mining applications, pay careful attention to the particular hazards that exist when using aluminium parts!
While operating the coupling, pay attention to:
Changes in operation noises Occurring vibrations Attention!
• Disconnect the drive immediately, if any irregularities are observed while operating
the coupling!
• Identify the cause for the problem using table 5 “Operation Faults and Possible Causes“
and correct the fault.
The listed problems are some examples to assist you in troubleshooting.
• All the machinery components and operation modes have to be considered for the
determination and correction of faults!
baws014-gbr-1
TSCHAN-S SV
- 14 -
자주 묻는 질문
Tschan의 Tschan SV-200 Coupling에 관한 자주 묻는 질문입니다. Imtek Engineering은 United States에서 Tschan의 Tschan SV-200 Coupling를 조달하는 데 도움을 드릴 준비가 되어 있습니다.
Imtek Engineering은 신뢰할 수 있는 공급 채널을 통해 정품 Tschan 제품을 조달하여 United States 고객에게 경쟁력 있는 가격으로 제공합니다.
