SD1-K-24
• The plug-in display unit SD 1 may be used with
any KRACHT volume counter which uses a plug-in
connection according to DIN 43650.
• The display unit is simply inserted between the plug
and the plug socket on the volume counter.
The displayed value will be the actual flow rate or
the volume. The square wave signal remains available
for external processing.
• Volume counters already supplied can be equipped
with the plug-in display unit. To achieve this the
amplifier card must be removed from the plug.
• The plug-in display unit is freely programmable.
All necessary settings can be achieved with 2 keys.
The programmed data is stored on an FRAM and
therefore saved in case of power failure.
• As an option the SD 1 is available with an analogue
output (0 -- 20 mA or 4 -- 20 mA) proportional
to flow rate or volume or with two programmable
relay contacts. In both cases, the square wave signals
are no longer available.
