Industrial spare parts & engineering solutions since 2001.
Moog Kit Connectors For Ds2020
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Connector |
| Product Name | Moog Kit Connectors For Ds2020 |
| Product Code | Unspecified |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Moog products, including Moog Kit Connectors For Ds2020, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Moog parts at competitive prices. Even if Moog Kit Connectors For Ds2020 is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
3.4 Cables
If you are building your own cables or using motors from other manufacturers, please consult the
following table for recommended cable specifications.
DS2020 L50/L75
Feature
Section of the motor cable Section of the brake cable Maximum motor cable
length Maximum cable capacitance
L85
L125
2A - 4A - 6A
- 8A - 12A
16A
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
24A
32A
L165
L355
48A
64A
144A
192A
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
1 mm2 16 AWG 100 m
< 150 pF/m
Section of I/O
0,22-1 mm2 16 AWG
Section of AC power supply cable
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
Section of brake resistor cable
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
Section of 24
VDC cable
0.8 mm2 18 AWG
Section of ground cable
2.1 mm2 14 AWG
3.3 mm2 12 AWG
5.3 mm2 10 AWG
8.4 mm2 8 AWG
13 mm2 6 AWG
16 mm2 5 AWG
35 mm2 2 AWG
50 mm2 0 AWG
For the Metric/AWG conversion table, see Metric/AWG Conversion Table on page 169.
For the list of connector see Table on page 41.
i
The power and control cables (except those that go from the AC power supply to the
filter) must be shielded. To minimize noise, it is recommended that they are
separated from each other at a distance greater than 200 mm.
i
Shielded power cables can be grounded with a copper bar using a clamp that
ensures an efficient electrical contact area with larger cross-section of the ground
wire.
Particular attention should be given to the use of appropriate cables.
The cables and the motor winding may interact with the drive output stage to create an oscillating
circuit that increases the maximum voltage of the system. The parameters that contribute to
determining this maximum voltage are: the capacity and the length of the cables, the motor
inductance, and the frequency and rising edges of the PWM modulation. An analysis of these
parameters is recommended to prevent excessive voltages for the application. For applications
assistance, contact Applications Engineering.
PN: CDL67834, Rev. B April 2024
Page 55 of 171
Frequently Asked Questions
Frequently asked questions about Moog Kit Connectors For Ds2020 by Moog. Imtek Engineering is ready to assist you in sourcing Moog Kit Connectors For Ds2020 from Moog in United States.
United StatesImtek Engineering sources genuine Moog products through trusted supply channels and supplies them to customers in United States at competitive prices.
