Output
Voltage 0…10 VDC or 10…0 VDC, 0…10 VDC and 10…0 VDC (controller input resistance RL > 5 k?)
Current 4…20 mA or 20…4 mA (minimum / maximum load: 0 / 500 ?)
Measured value Position
Measurement parameters
Resolution Infinite
Cycle time Typ. 0.3 ms < t < 2 ms (depending on stroke lengths)
Linearity ? ±0.02 % F.S. (minimum ±60 ?m)
Repeatability ? ±0.005 % F.S. (minimum ±20 ?m)
Operating conditions
Operating temperature ?40…+75 °C (?40…+167 °F)
Humidity 90 % rel. humidity, no condensation
Ingress protection 1,2 IP67 (if mating connectors are correctly fitted)
Shock test 100 g (single shock) IEC standard 60068-2-27
Vibration test 5 g / 10…2000 Hz IEC standard 60068-2-6 (resonance frequencies excluded)
EMC test Electromagnetic emission according to EN 61000-6-3
Electromagnetic immunity according to EN 61000-6-2
The sensor meets the requirements of the EC directives and is marked with .
Magnet movement velocity ? 5 m/s
Design / Material
Sensor electronics housing Aluminum
Guided driving rod Aluminum
Stroke length 50…1500 mm (2…60 in.)
Mechanical mounting
Mounting position Any
Mounting instruction Please consult the technical drawings and the brief instructions (document number: 551684)
Electrical connection
Connection type M12 (5 pin) male connector
Operating voltage +24 VDC (?15 / +20 %); UL recognition requires an approved power supply with energy
limitation (UL 61010-1), or Class 2 rating according to the National Electrical Code (USA) /
Canadian Electrical Code.
Ripple ? 0.28 Vpp
Current consumption 50…140 mA
Dielectric strength 500 VDC (DC ground to machine ground)
Polarity protection Up to ?30 VDC
Overvoltage protection Up to 36 VDC
