Product Name: Mts Sensor GBS GBS Position Sensor
Brand: Mts Sensor
Product Code: GB-S
Tags: Mts Sensor
Position
Mts GBS Position
Mts GBS Position
GBS GBS Position
Mts GBS GBS
Mts GBS Position
GBS Sensor
Mts Position Sensor
Sensor GBS Position Sensor
Sensor GBS Sensor
GBS Sensor
GBS GBS Position
Position Sensor
GBS Sensor
Mts GBS GBS Sensor
Mts Sensor GBS
Sensor Position
GBS Position Sensor
Are you interested in the product Mts Sensor GBS GBS Position Sensor from manufacturer Mts Sensor with code GB-S? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!
Get Offer With E-Mail: info@im-tek.com
Get a offer for Mts Sensor GBS GBS Position Sensor from our live support team now!
OutputVoltage 0…10 VDC and 10…0 VDC (min. load controller: > 5 k?)Current 4(0)…20 mA or 20…4(0) mA (min./max. load: 0/500 ?)Programming Programming of set points using optional accessories 2Bluetooth® version 2.1Measured value PositionMeasurement parametersResolution 16 bit (minimum 1 µm depending on stroke length)Cycle time Up to 1200 mm: 0.5 msUp to 2400 mm: 1.0 ms> 2400 mm: 2.0 msLinearity typ. ? ±0.02 % F.S. (minimum ±60 µm)Repeatability typ. ? ±0.005 % F.S. (minimum ±20 ?m)Operating conditionsOperating temperature –40…+90 °C (–40…+194 °F), option –40…+100 °C (–40…+212 °F)Ingress protection IP67 with proper mating connectorIP68 for cable outletShock test 100 g (single shock) / IEC standard 60068-2-27Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded)EMC test Electromagnetic emission according to EN 61000-6-4Electromagnetic immunity according to EN 61000-6-2The sensor meets the requirements of the EC directives and is marked withMagnet movement velocity AnyDesign/MaterialSensor electronics housing 3 Stainless steel 1.4305 (AISI 303), option: stainless steel 1.4404 (AISI 316L)Sensor rod Stainless steel 1.4306; 1.4307 (AISI 304L), option: stainless steel 1.4404 (AISI 316L)Stroke length 25…3250 mm (1…128 in.)Operating pressure 350 bar, 700 bar peak (at 10 × 1 min)Mechanical mountingMounting position AnyMounting instruction Please consult the technical drawings and the operation manual(document number: 551511)Electrical connectionConnection type Cable outlet5 pin M12 connector A-coded6 pin M16 connectorOperating voltage +24 VDC (?15 / +20 %)Ripple ? 0.28 VppCurrent consumption 100 mA typically dependent on stroke lengthDielectric strength 500 VDC (DC ground to machine ground)Polarity protection Up to ?30 VDCOvervoltage protection Up to 36 VDC