Product Name: Mts Sensor MS Mobile Hydraulic Position Sensor
Brand: Mts Sensor
Product Code: MS
Tags: Mts Sensor
Sensor MS Hydraulic Position Sensor
Sensor MS Mobile Hydraulic
Mts Sensor MS Hydraulic
Sensor MS Position Sensor
Hydraulic
Sensor MS Mobile Position
Mts Mobile Position Sensor
Mts Sensor MS Mobile Hydraulic
Sensor MS Mobile Position
Mts Sensor Position
Mts Mobile Sensor
Mts Sensor MS Hydraulic Position
Sensor
Mts Sensor MS Position Sensor
Mts MS Position Sensor
Sensor Mobile Hydraulic
Sensor Hydraulic Sensor
Sensor MS Hydraulic
MS Mobile Position Sensor
Mobile Hydraulic Position Sensor
Are you interested in the product Mts Sensor MS Mobile Hydraulic Position Sensor from manufacturer Mts Sensor with code MS? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!
Get Offer With E-Mail: info@im-tek.com
Get a offer for Mts Sensor MS Mobile Hydraulic Position Sensor from our live support team now!
InputMeasured value PositionStroke range 50…2500 mm (in 5 mm steps)OutputSignal characteristic Analog output restricted by noise or A/D converter of control unitVoltage 0.25…4.75 VDC / 0.5…4.5 VDCCurrent 4…20 mAResolution Typ. 0.1 mmPower up time Typ. 250 msMounting zone 22 mmDamping 36.5 / 63.5 mmAccuracyLinearity0050…0250 mm ? ±0.1 mm,0255…2000 mm ±0.04 % (F.S.),2005…2500 mm ? ±0.8 mmRepeatability ± 0.1 mmInternal sample rate 2 msSetpoint tolerance ? 1 mmOperating conditionsMounting position AnyOperating temperature electronics ?40…+105 °CStorage temperature ?25…+ 65 °CFluid temperature ?30…+ 85 °CDew point, humidity EN60068-2-30, 90 % rel. humidity, no condensationPressureOperating pressure ratings Pressure impulse test according DIN EN ISO 19879Pressure Pipe Ø 7 mmNominal operating pressure (Pn) 300 barMax. overload pressure in cylinder (Pmax) 400 barMax. static proof pressure in cylinder (Pproof) 525 barIP ratingM12 connector EN60529 (IP69K) when pluggedSensor housing EN60529 (IP67)Environmental testingShock test IEC 60068-2-27, 100 g (11 ms) single shock, 50 g (11 ms) at 1000 shocks per axisVibration test IEC 60068-2-64, 15 g (r.m.s.) Ø 7 mm pressure pipe (10…2000 Hz) – resonance frequencies excludedEMCtest & evaluationISO 14982 Agricultural and forest machinesEN 13309 Construction machinesImmunity: ISO 11452-2 (200 V/m Antenna), ISO 11452-4 (200 mA BCI)Emissions: CISPR 16Transiente Impulses: ISO 7637-2E.S.D.: ISO/TR 10605Materials and dimensionsPressure pipe Stainless steel 1.4306 / AISI 304LHousing Stainless steel 1.4305 / AISI 303Sealing O-ring 23.47 ×2.62 mm NBR; Backup Ring 28 × 2 × 1.4 mm, Parker Parbaks 8-119 N1444-90 or 8-119 N0300-90M12 connector insert Material: polyamide reinforces; O-ring 7 × 1.35 mm NBR 70; pins: brass with gold plated pinsM12 flange Brass nickel-plated with O-ring 13 × 1.6 NBR 70Electrical installationConnector M12 male plug or cable assemblySupply voltage 12 VDC (8…32 VDC) 24 VDC (8…32 VDC)Current consumption Typ. < 100 mA Typ. < 50 mALoad (output VDC) RL> 10 k? RL> 10 k?Load current (output VDC) Typ. 0.5 mA Typ. 0.5 mALoud (output mA) RL < 250 ? RL < 500 ?Inrush current Max. 2.5 A/2 ms Max. 4.5 A/2 msSupply voltage ripple < 1 % p-pPower drain < 1 WOver voltage protection (GND-VDC) Up to +36 VDCPolarity protection (GND-VDC) Up to ?36 VDCInsulation Resistance R ? 10 M? @ 60 secElectric strength 500 VDC (DC GND to chassis GND)