im-tek.com

Olaer LOC 011-4-D-D Air Oil Cooler

Olaer

Product Code: A-LOC 011-4-D-D Cooling System
Brand: Olaer



GET OFFER: info@imtek.com.tr

Description for Olaer LOC 011-4-D-D Air Oil Cooler

The LOC cooling system with three-phase AC motor is optimized for use in the industrial sector. The system is supplied ready for installation. An integrated circulation pump makes it possible to cool and treat the oil in a separate circuit – offline cooling. The cooling system can also be equiped with Parker filter unit. Together with a wide range of accessories, the LOC cooling system is suitable for installation in most applications and environments. The maximum cooling capacity is 45 kW at ETD 40 °C. Choosing the right cooler requires precise system sizing. The most reliable way to size is with the aid of our calculation program. This program, together with precise evaluations from our experienced, skilled engineers, gives you the opportunity for more cooling per € invested. Overheating - an expensive problem An under-sized cooling capacity produces a temperature balance that is too high. The consequences are poor lubricating properties, internal leakage, a higher risk of cavitation, damaged components, etc. Overheating leads to a significant drop in cost-efficiency and environmental consideration. Temperature optimisation - a basic prerequisite for cost-efficient operation Temperature balance in a hydraulic system occurs when the cooler can cool down the energy input that the system does not consume - the system’s lost energy: (Ploss = Pcool = Pin – Pused). Temperature optimisation means that temperature balance occurs at the system’s ideal working temperature – the temperature at which the oil’s viscosity and the air content comply with recommended values. The correct working temperature produces a number of economic and environmental benefits: • Extended hydraulic system life. • Extended oil life. • Increased hydraulic system availability - more operating time and fewer shutdowns. • Reduced service and repair costs. • Maintained high efficiency in continuous operation – the system efficiency falls if the temperature exceeds the ideal working temperature.

Recommended Products For Olaer


Olaer DI10MS350 Safety Block
Olaer 11076701125 50 liter Bladder
Olaer EHV10 Accumulator
Olaer EHV 24,5-330/90 Bladder
Olaer EHV-0.2-350/00 Bladder
Olaer VGU-25/250-7-TS3-3 Accumulator Tester
Olaer EHV32 Gas Valve Plug For Bladder
Olaer LOC3-004-4-D-A-0-00-S25-0-00-0 Oil Cooler
Olaer PWO B10THx40/1P-SC-S Water Oil Cooler
Olaer Hc0200A-00-17 Accumulator
Olaer ELM-0,75-210/00/AF Diaphragm Accumulator
Olaer ELM 0,75- 210/00/AF 108497-01125 Diaphragm Accumulator
Olaer Ehv 10-350/90 Accumulator
Olaer IHV50-40/02 Bladder
Olaer PWO B10-40-Z Water Oil Cooler
Olaer EBV 20-20/90-A-47-K-0-0-00 Accumulator
Olaer IHV 32-207/45 Accumulator
Olaer EHV 10-330/90 Bladder
Wilkerson R16-03-000 Regulator
SKF PBMF 051006 M1 Bushing
Foxboro 244LD-SI4S2LNMH1C4-HML2368 Intelligent Buoyancy Transmitter w/Torque Tube
Viking Pump 4124B SERIES Pumps
Gefran LM-L-A-0450 0000X000X Linear Position Transducer
Westcode N0616LC450 Phase Control Thyristors-Capsule
Rhomberg RI0 Inductive Prox Namur (2 Wire) DIN 19234
Apollo GM Multistage high-pressure pumps - 63 bar
Wilkerson RRP-96-935
Westcode M1163NC450 Fast Recovery Diode
Gefran LT-B-0050-P 0000X000B0N Potentiometer
Olaer Model: EHV 37-690/90-01125 Gas Connection With Burst Disk
KSB UPFN 200/02+UMAI150-3/22-DOL Pump
Wilkerson R31-C8-L00 Regulator
Gefran PC-B-0100 L000X000X0N Potentiometer
Stenflex Type VS-1 DN 125 Expansion Joint
SKF W 607-2Z Deep Groove Ball Bearing
Sitema KFHS 125 KFHS 125 70 Locking Unit
Habasit H-7EXDT Light Conveyor Belt
KSB Amarex-N ~ F 65-220/004 YLG-112 Pump
SIES-8M-NO-24V-K-7,5-OE Proximity Sensor SIES-8M-NO-24V-K-7,5-OE Proximity Sensor
Kadant 995.176/ RX Rotary Union
Italvibras ITVAF 6/2010-S90 603037 High-frequency Electric Vibrator
Coax MK / FK 32 DR EX Ex Certified Valve