Industrial spare parts & engineering solutions since 2001.
- Products
- Ropex
- Controller
- Ropex RES-409 Temperature Controller
Ropex RES-409 Temperature Controller
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Controller |
| Product Name | Ropex RES-409 Temperature Controller |
| Product Code | Unspecified |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Ropex products, including Ropex RES-409 Temperature Controller, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Ropex parts at competitive prices. Even if Ropex RES-409 Temperature Controller is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
Heatsealing band type and temperature range
All controllers manufactured as of February 2007:
The temperature range and temperature coefficient settings can also be specified
in the ROPEX visualization software ( section 10.12 "Diagnostic interface /
visualization software (as of February 2007)" on page 50) in addition to using the
rotary coding switch (see below) or the CAN interface:
Temperature range:
200°C, 300°C, 400°C or 500°C Temperature coefficient: 400…4000ppm (variable setting range)
Five different ranges can be set with the rotary coding switch:
Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…300°C (e.g. Alloy L)
Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20) Temperature coefficient 780ppm, 0…500°C (e.g. Alloy L)
Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500) Various ranges can be selected via the CAN interface:
Temperature coefficient 1100ppm (e.g. Alloy A20) 0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 780ppm (e.g. Alloy L) 0…200°C, 0…300°C, 0…400°C, 0…500°C
Temperature coefficient 3500ppm (e.g. LEX3500) 0…200°C, 0…300°C, 0…400°C, 0…500°C
All controllers manufactured as of February 2007:
The settings with the rotary coding switch are considered to be the factory setting. This corresponds to CAN message address 8, value 10 (dec)
( section 10.3 "Receiving CAN messages" on page 32).
!
All controllers manufactured up to January 2007:
Six different ranges can be set via the CAN interface:
Temperature coefficient 1100ppm, 0…200°C (e.g. Alloy A20) Temperature coefficient 1100ppm, 0…300°C (e.g. Alloy A20)
Temperature coefficient 1100ppm, 0…400°C (e.g. Alloy A20) Temperature coefficient 1100ppm, 0…500°C (e.g. Alloy A20)
Temperature coefficient 3500ppm, 0…200°C (e.g. LEX3500) Temperature coefficient 3500ppm, 0…300°C (e.g. LEX3500)
Analog output (actual value) Terminals 17+18
0…10V DC, Imax = 5mA Equivalent to 0…300°C or 0…500°C Accuracy: ±1% add. 50mV
Digital logic levels Terminals 5, 7 (As of February 2007)
LOW (0V): 0…2VDC, electrically isolated
HIGH (24VDC): 12…30VDC (max. current input 6mA) Reverse polarity-protected
Alarm relay Terminals 12, 13, 14
Umax = 30V (DC/AC), Imax = 0.2A, changeover contact, potential-free
Maximum load (primary current of impulse transformer)
Imax = 5A (duty cycle = 100%) Imax = 25A (duty cycle = 20%)
Power dissipation
max. 20W
Page 12
RES-409
Version 1
Frequently Asked Questions
Frequently asked questions about Ropex RES-409 Temperature Controller by Ropex. Imtek Engineering is ready to assist you in sourcing Ropex RES-409 Temperature Controller from Ropex in United States.
United StatesImtek Engineering sources genuine Ropex products through trusted supply channels and supplies them to customers in United States at competitive prices.
