Ascon WL-00-1/F3 TEMPERATURE CONTROLLER RANGE 0-600C

IND U S T R I A L A U T O M AT I O N | IND U S T R I A L C O N T R O L L E R S
24 Vac/Vdc, 100… 240 Vac/Vdc ±10% (50/60 Hz) 10 VA approx.
48 x 48 mm (1/16DIN) - depth 98 mm / 190 g approx.
Flush in panel in 45 x 45 mm hole Screw terminal block 2 x 1 mm²
IP 65, mounted on panel with gasket 0… +50°C (32… +122°F) /-25… +60°C (-13… +140°F)
30… 95 RH% without condensation Directive CEE EMC 2004/108/CE (EN 61326), Directive CEE BT 2006/95/CE (EN 61010-1)
ANALOG. (TLK43)
+1
-
+
+
-
+ +
8
-
NO NO
9 10 11 12
-
+
NO
C
13 14 15 16 17 18
GND B
SUPPLY
DIG. IN (TLK43)
A
RS485
4..20 mA PASSIVE (2 wires)
0/4..20 mA ACTIVE 0..50/60 mV 0/1..5 V 0/2..10 V
TLK43 TEMPERATURE RANGES INPUT
tc K
tc B tc E tc L
tc T tc C Ingrared sensors (ZIS)
Pt100 (IEC)
Out3 Out4
7
C
+
TEMPERATURE RANGES
tc R
The dimensions are expressed in mm
28
I
tc N
44.5
48
+
6
NO
OUT4 OUT3
+
4..20 mA ACTIVE
+
-
PTC (KTY81-121)
NTC (103-AT2)
=
OUT 12 VDC (Max 20 mA)
-
tc S
98
5
C
OUT1 G
SPECIAL CONTROLLERS
AND “CUSTOM”
PTC
S I -
AT ST
-
4
TA HB
Pt1000 (IEC)
Out1 Out2
3
NTC
tc J
TLK43
SET
-
-
+ -
Pt100
R O -
DIMENSIONS 9.5
2
OUT2 + G
WITHOUT D.P.
-160 ... 1000 °C
- 256 ... 1832 °F -100 ... 1370 °C
- 148 ... 2498 °F 0 ... 1760 °C 32 ... 3200 °F 72 ... 1820 °C 162 ... 3308 °F
-150 ... 750 °C -252 ... 1382 °F -150 ... 900 °C -252 ... 1652 °F -250 ... 1300 °C
-418 ... 2372 °F -50 ... 1760 °C -58 ... 3200 °F -250 ... 400 °C -418 ... 752 °F
0 ... 2320 °C 32 ... 4208 °F -46 ... 785 °C -50 ... 1445 °F -200 ... 500 °C
-328 ... 932 °F -200 ... 850 °C -328 ... 1562 °F -55 ... 150 °C -67 ... 302 °F
-50 ... 110 °C -58 ... 230 °F
WITH D.P.
-160.0 ... 999.9 °C -199.9 ... 999.9 °F -100.0 ... 999.9 °C -148.0 ... 999.9 °F
0.0 ... 999.9 °C 32.0 ... 999.9 °F 72.0 ... 999.9 °C 162.0 ... 999.9 °F -150.0 ... 750.0 °C
-199.9 ... 999.9 °F -150.0 ... 900.0 °C -199.9 ... 999.9 °F -199.9 ... 999.9 °C
-199.9 ... 999.9 °F -50.0 ... 999.9 °C -58.0 ... 999.9 °F -199.9 ... 400.0 °C
-199.9 ... 752.0 °F 0.0 ... 999.9 °C 32.0 ... 999.9 °F -46.0 ... 785.0 °C
-50.8 ... 999.9 °F -199.9 ... 500.0 °C -199.9 ... 932.0 °F -199.9 ... 850.0 °C
-199.9 ... 999.9 °F -55.0 ... 150.0 °C -67.0 ...302.0 °F -50.0 ... 110.0 °C
-58.0 ... 230.0 °F
PAC SYSTEMS
TC
ext.
gen.+
Notes:
OUT 3 and OUT 4 have to be of the same type (both R or O).
CT INPUT: this function has to be always associated to an output (R or O).
Analogue output and CT function are mutually exlcusive.
Digital input is always available when RS485 option is provided.
RS485 and OUT 4 are mutally exclusive.
48
RELAY
INPUT
R O C V -
H -
-
SSR
R O C V
R O -
DIN RAIL MOUNTING CONTROLLERS
-
L H
THERMOSTATS ANALOGUE CONTROLLERS
ANALOG.: 0/4 ..20 mA - 0/2..10 V SSR: 7mA/14VDC
RELAY OUT1: 5A-AC1 (2A-AC3) 250VAC
RELAYS OUT2,3,4: 3A-AC1 (1A-AC3) 250VAC
PREPROGRAMMED SYSTEMS
ON/OFF, Neutral Zone, PID single and double action AUTOTUNING, FAST TUNING, Selftuning
Up to 4 pre-programmable Set Point 3 points On analogue output RS485 with ModBus-RTU (JBUS) protocol
1200… 38400 baud, programmable
CODE
PLC AND OPERATOR PANELS
Auxiliary power supply Current (as alternative to Relay output) Voltage (as alternative to Relay output)
FUNCTIONAL Control
PID functions Multi Set Point Servomotor control Signal retransmission Serial communication
Baud rate GENERAL Power supply Power consumption Dimensions / Weight Mounting
Connections Front protection degree Operating / storage temperature Operating humidity
Conformity
OUT 1: Relay SPST-NO (5 A-AC1, 2 A-AC3/250 Vac) or 7 mA/14 Vdc 20 mA max. to drive SSR
OUT 2, OUT 3 and OUT 4: Relay SPST-NO (3 A-AC1, 1,5 A-AC3/250 Vac) or 7 mA/14 Vdc 20 mA max. to drive SSR
12 Vdc/20 mA max.
OUT 1 and OUT 2: 0/4… 20 mA.
OUT 1 and OUT 2: 0/2… 10 V
TLK41 / TLK42 / TLK43
POWER SUPPLY 24 Vac/Vdc 100... 240 Vac
OUT 1 Relay Voltage for SSR driving 0/4... 20mA 0/2... 10V
OUT 2 Relay Voltage for SSR driving 0/4... 20mA 0/2... 10V Not available
OUT 3 Relay Voltage for SSR driving Not available
OUT 4 Relay Voltage for SSR driving Not available
SERIAL COMMUNICATION AND DIGITAL INPUT RS485 RS485 and digital input Not available
CURRENT TRANSFORMER INPUT Available Not available
TIMERS COUNTERS
POWER LIMITERS
Up to 4
TLK43
To compose the part number, pls. choose one of the option for each variable
INDICATORS
Accuracy Current transformer (CT) input Digital input OUTPUTS
Thermocouples: J, K, S, B, C, E, L, N, R, T (see table next page for temperature ranges)
Infrared sensors: J or K Thermoresistances: Pt100 and Pt1000 3 wires (see table next page for temperature ranges)
Thermistors PTC KTY 81-121 (990 kΩ at 25°C) (-55... +150°C/-67... +302°F or -55.0... +150.0°C -67.0... +302.0°F)
and NTC 103AT-2 (10Ω at 25°C) (-50... +110°C/-58... +230°F or -50.0... +110.0°C/-58.0... +230.0°F)
Linear signals: 0/10... 50 mV, 0/12... 60 mV, 0/4... 20 mA, 0/1... 5 V, 0/2... 10 V
±0.15% fs
CT 50 mA max.
optoisolated
CONNECTIONS
I/O MODULES
Universal
TLK43 Dual display: 4 red and green digit, h 7mm
SUPERVISION
DISPLAY Display INPUTS
COMBUSTION CONTROL
HOW TO ORDER
FEATURES
ACCESSORIES
• UNIVERSAL INPUT
• RS485
• UP TO 4 OUTPUTS
• CT INPUT
ADVANCED PROGRAMMER CONTROLLERS
INDUSTRIAL CONTROLLERS
TLK 43
29