Промышленные запчасти и инженерные решения с 2001 года.
Buhler GAS 222.11 Sample Gas Probe
Технические спецификации / Документация продукта
Свяжитесь с нами! В течение 24 рабочих часов (кроме выходных и праздников) подтвердим наличие и ориентировочные сроки поставки.
Описание продукта
Продукция Bühler, включая Buhler GAS 222.11 Sample Gas Probe, поставляется по каналам параллельного импорта и оперативно доставляется нашим клиентам в United States. Imtek Engineering предлагает оригинальные компоненты Bühler по конкурентоспособным ценам. Даже если Buhler GAS 222.11 Sample Gas Probe отсутствует на нашем сайте, вы можете запросить коммерческое предложение — наша команда ответит в кратчайшие сроки.
United States- Unheated
- Base unit with manual shut-off valve
- For in-situ and outlet filter
- With blowback connection
- The outlet filter can easily be removed by turning the handle 90°.
- For dust loads up to 2g/m³, non-condensable gases. Combined with inlet filter up to 10g/m³ and higher
- Including flange seal and screws
The probe has no innate ignition source and is therefore suitable for use in Ex areas.
The base unit becomes functional by adding accessories suitable for the application.
These include:
- Sampling tubes
- Unheated extensions
- Inlet filter
- Outlet filter
- Calibrating gas connection
- ANSI adapter flange
- Pneumatic drive
- Shut-off valve
- Blowback
- Blowback control
Technical Data Gas Probe Technical Data Probe operating temperature:
max. 200 °C
Ambient temperature without accessories:
-20 to +70 °C
Ambient temperature with accessories:
Component
Ambient temperature range
Compressed air valve:
-10 °C < Tamb < +55 °C
Pneumatic drive:
-20 °C < Tamb < +80 °C
Limit switch:
-20 °C < Tamb < +100 °C
Solenoid valve for pneumatic drive:
-10 °C < Tamb < +55 °C
Component
Medium temperature range
Compressed air valve:
-10 °C to +80 °C
Solenoid valve for pneumatic drive:
-10 °C to +100 °C
Medium temperature (blowback):
Regulator setting range:
+50 to +200 °C
Low/high temperature alarm:
Alarm adjustable ±5.....30 K from setpoint, factory preset to 15 K, max. switching
current 1 A
Electrical data:
230 V, 2.0 A, 50/60 Hz 115 V, 3.8 A, 50/60 Hz
Protection class:
IP54
Max. operating pressure:
6 bar
Materials in contact with media Flange:
Probe body:
Ball valve:
Seal:
Stainless steel 1.4571 Stainless steel 1.4571 Stainless steel 1.4408/1.4462/PTFE
Stainless steel 1.4404/graphite/and see filter Optional coating with SilcoNert® 2000 *
*The SilcoNert® 2000 coating forms a layer of hydrogenated, amorphous silicon on the surfaces of the measuring gas probe that
are in contact with media. It is applied by chemical vapour deposition (CVD), which creates a uniformly thin layer on the surface.
SilcoNert® 2000 is temperature-resistant up to 400 °C, chemically inert and hydrophobic. The coating is resistant to many chemically corrosive liquids. If you are unsure about the suitability for specific gas matrices, please contact Bühler Technologies
GmbH.
2
Bühler Technologies GmbH
We reserve the right to amend specification.
DE461021 ◦ 01/2026
Часто Задаваемые Вопросы
Часто задаваемые вопросы о Buhler GAS 222.11 Sample Gas Probe марки Bühler. Компания Imtek Engineering готова помочь вам приобрести Buhler GAS 222.11 Sample Gas Probe от Bühler в United States.
Компания Imtek Engineering закупает оригинальную продукцию Bühler через проверенные каналы поставок и предлагает её клиентам в United States по конкурентным ценам.
