Dropsa 1A-0156060 Pump

MANUAL PUMP Series 156000
\
C har acteristics
FLOW RATE::
3 3.4 cm for each forward and return movement of the lever;

PRESSURE:
30~150 bar (0.5 Mpa);

SETTING THE
INVERTER:
120 bar;

LUBRICANT:
Min. oil 15 cSt Grease (see table);

RESERVOIRS 1.2 and 5 litres/Kg;

PRESSUREGAUGE:
0÷250 bar;

HYDRAULIC
INVERTER:
Equipped with two valves to control the reverse pressure.
Adjustable from 30 to 150 bar;

OUTLET:
3/8” UNI-ISO 228/1 (3/8 Gas.);

RESERVOIR FILLING
CONNECTION:
½” A UNI-ISO 228/1 (1/2 gas.).
Characteristics
Series 156000 manual pumps for oil or grease for lubrications systems Manual pumps for oil and grease for supplying
dual-line lubrication systems, with a flow rate of 3.4 cc.
Complete with hydraulic pressure inverter for the automatic reverse of the lines upon reaching the
set pressure. The pressure can vary from 30 to 150 bar.
The pumps are equipped with a dual effect piston that moves horizontally.
The hardened and lapped steel piston is controlled by valves with small pistons and is
actuated by a lever on the handle with a stub coupling.
By actuating the control lever, one of the two supply lines is pressurised.
After reaching the pressure set using the inverter’s regulation valves, pressurisation inversion is
achieved, indicated by:
a) an increase in resistance of the control lever b) zeroing of the pressure gauge
c) alternating output of the pistons of the pressure regulation valves of the inverter
Dimensions (please refer to the table below)
C
A pplicati ons
Supply of dual-line lubrication systems
450 mm.
A
B