Moog DS 2000 25 AMP Servodrive

Single-Axis Servo Drive - Sizes 1 to 7
Moog Modular Multi-Axis Servo Drive System
Technical Data Parameters size 5 Type G392-045
Ordering number
G392-045 G392-060 G392-072 G395-053 G395-070 G395-084
Output, motor side Voltage
3-phase UMains
Rated current, effective (IN)
45 A
1)
60 A
72 A
53 A
70 A
84 A
Rotating field frequency
0 to 400 Hz
Switching frequency of power stage
4/8/12/16 kHz (factory setting 8 kHz at +40 °C (+104 °F) cooling air temperature)
Input, mains side Mains voltage (UMains)
(3 x 230 V/3 x 400 V/3 x 460/3 x 480 V) ±10 %
Device connected load (with mains choke)
31.2 kVA
41.6 kVA
50 kVA
36.7 kVA
48.5 kVA
52.6 kVA2)
Current consumption (with mains choke)1)
45 A
60 A
72 A
53 A
70 A
76 A2)
Asymetry of mains voltage
±3 % maximum
Frequency
50/60 Hz ±10 % 1,010 W
690 W
930 W
1,130 W
430 µF
900 µF
1)
610 W
830 W
DC link capacity
430 µF
900 µF
Brake chopper switch-on threshold
820 VDC
Minimum ohmic resistance of an externally installed braking resistor
18 Ω
13 Ω
10 Ω
Brake chopper peak with external braking resistor
37 kW
52 kW
67 kW
Optional: Internal braking resistor
-
20 Ω
10 Ω
Brake chopper continuous power with internal braking resistor
-
675 W
1,350 W
Brake chopper peak with internal braking resistor
-
34 kW
67 kW
Power loss at IN
1) 3)
DC link
Servo Drive
G392-045 G392-060 G392-072 G395-053 G395-070 G395-084
Cooling method
Air-cooled
Protection
IP10 except terminals (IP00)
Liquid-cooled
Cooling air temperature maximum (at 4 kHz power stage switching frequency)
+45 °C (+113 °F)
Weight
13 kg (28.7 lb)
Mounting type
Vertical mounting with unhindered air flow
Mounting several servo drives possible at a distance of
20 mm (0.79 in)
16.5 kg (36.4 lb) 2 mm (0.08 in)
1) Data referred to mains voltage 3 x 400 VAC and 8 kHz switching frequency
2) DN input current must be limited to maximum 76 A
3) With liquid cooling typically 80 % of the power loss is lost by the liquid chiller.
Rev. J, November 2017
39