Mts Sensor EP-O-0600M-D34-1-A01

Input

Measured variable Position

Stroke length 50 - 2500 mm

Output

Interface CAN System ISO-DIS 11898

Data protocol CANopen: CIA Standard DS 301 V3.0 / Encoder Profile DS 406 V3.1

Baud rate, kBit/s 1000 800 500 250 125

Cable length, m < 25 < 50 < 100 < 250 < 500

The sensor will be supplied with ordered baud rate, which is changeable by customer

Accuracy

Resolution 10 µm, 20 µm

Velocity 1 mm / s

Linearity, deviation < ± 0.02 % F.S. (Minimum ± 60 µm)

Repeatability < ± 0.005 % F.S. (Minimum ± 10 µm)

Temperature coefficient < 15 ppm/ºC

Update frequency 1 ms

Operating Conditions

Magnet speed Any

Operating temperature -40° C ... +75° C

Dew point, humidity 90 % rel. humidity, no condensation

Ingress protection IP67 with proper mating connector

Shock test 100 g (single shock) IEC-Standard 60068-2-27

Vibration test 15 g / 10 - 2000 Hz IEC-Standard 60068-2-6 (resonance frequencies excluded)

EMC-Test Electromagnetic emission EN 61000-6-4 (for use in industrial environment)

Electromagnetic immunity EN 61000-6-2

The sensor meets the requirements of the EC directives and is marked with CE

Design / Material

Sensor enclosure Aluminum

Sensor housing Aluminum

Position magnet type Magnet slider hard ferrite, block magnet plastic

Installation

Mounting type Adjustable mounting clamps

Electrical connection

Connection type 5 pin connector M12

Supply voltage 24 VDC (+20 % / -15 %)

Current consumption max. 90 mA

Ripple < 0.288 Vpp

Dielectric strength 500 VDC (DC ground to machine ground)

Polarity protection > -30 VDC

Overvoltage protection < 36 VDC