Santerno Penta Marine Inverter

Compact, multi-purpose, high-performing inverter for: – Three-phase asynchronous motors – Three-phase synchronous motors The drive for extreme ambient conditions – Robust and reliable design, ensuring resistance to vibrations, heat and humidity, the typical conditions on platforms and aboard ships – May be installed offshore and onshore – Fully made of steel – Wide range of operating temperature with no derating: -10°C to 55°C – Tropicalized boards (conformal coating) – Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10min (depending on the drive model) – Peak current up to 240% for 3 seconds – Input frequency: 50-60Hz – Integrated RS485 serial port, MODBUS RTU communications protocol – Wide range of integrated protection features – Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand) – Degree of protection IP00, IP20, IP54 – Parallel configuration also available – Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels – SINUS PENTA CABINET/BOX in electrical cabinet also available – Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand – Manufactured with top quality materials, totally Made in Italy – Integrate d Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d – Certification: CE, DNV – Compatible with the Easy Harmonics software computing harmonic current damping – Compatible with the “REMOTE DRIVE” software for the remote control of the deviceAdvanced performance One product, 5 control modes: – IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/f pattern). – VTC (Vector Torque Control): sensorless vector function for high-torque performance applications. – FOC (Field Oriented Control): vector function with encoder for high torque accuracy and wide speed range. – SYN (Synchronous): vector function for brushless PMSMs featuring high torque accuracy and high energy efficiency. – RGN (Regenerative): regenerative sinusoidal AC/DC power supply unit, PF =1, for direct power supply of a series of drives. Outstanding programming flexibility for each specific industrial application – Smart Voltage Control now available: innovative algorithm hindering DC voltage increase with no need to apply external braking resistors. – Open-loop speed accuracy: ±0.5% of max. speed. Closed-loop speed accuracy(with encoder): <0.01% of max. speed. N.4 overload classes – Light: up to 120% for 60s every 10 minutes or for 120s every 20 minutes – Ipeak up to 144% for 3s (depending on the model) – Standard: up to 140% every 10 minutes or for 120s every 20 minutes – Ipeak up to 168% for 3s (ddepending on the model) – Heavy: up to 175% for 60s every 10 minutes or for 120s every 20 minutes – Ipeak up to 210% for 3s (depending on the model) – Strong: up to 200% every 10 minutes or for 120s every 20 minutes – Ipeak up to 240% for 3s (depending on the model) Most part of encoders are connected directly to the control board, with no need to connect optional boards for the FOC mode – Autocalibration of the motor parameter tuning – Advanced connectivity for the integration of a wide range of field buses. – Extensive range of STANDARD I/OsModel configuration The following configuration options may be integrated into the product: – Breaking unit: configuration with braking unit integrated up to size S32 included. An external braking unit is available for sizes greater than S32. – EMC Filter: Product version featuring integrated input filters in compliance with EN61800-3 2nd ed. In that case, the product ID is differentiated by suffix A1, A2, B. The integrated filters limit disturbance within the allowable ranges. – Degree of protection IP54: Models with degree of protection IP54 available up to size S32 included (220kW). – Operating devices: Set of operating devices on the front door, including a potentiometer, a mushroom-head push-button and a key-operated selector switch. Available for IP54 models only.Special configuration – Sinus Penta Parallel, configuration in parallel of 2 or 3 drives to control a single motor; available for size S41, S42, S51, S52. Benefits given by this solution: lower cost; improved stock management—the product may be modified for the connection in parallel by way of a special kit available on demand; easier repairings/replacement; space-saving. – 12-pulse or 18-pulse power supply: from size S41 up, power supply may be 12-pulse/18-pulse to reduce the current harmonic contents in the power supply line. – The PENTA MARINE drive in Regenerative configuration enables bidirectional interface with the mains, with power factor = 1 (true AFE application). Its true sine wave also enables dramatically reducing the THD below 5% and obtaining THDV = 0. – Extensive range of external accessories: input and output filters, encoder, resolver, braking resistors, etc.