Santerno Sinus Penta Inverter
Fast delivery from GERMANY to worldwide
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Technical Datasheets / Product Documentations
High-performance motor drive applicable to:
– Three-phase asynchronous motors
– Three-phase synchronous motors
– Sinusoidal current regenerative AFE from 1.3kW a 3000kW
The drives of the Sinus PENTA series come with multiple speed control modes and torque control modes for three-phase asynchronous and synchronous motors. Those control modes are user-selectable and ensure optimum performance in terms of accuracy and energy saving for each specific industrial application.
Model configuration
The following configuration options may be integrated into the product:
– Breaking unit: configuration with braking unit integrated up to size S32 included. An external braking unit is available for sizes greater than S32.
– EMC Filter: Product version featuring integrated input filters in compliance with EN61800-3 2nd ed. In that case, the product ID is differentiated by suffix A1, A2, B. The integrated filters limit disturbance within the allowable ranges.
– Degree of protection IP54: Models with degree of protection IP54 available up to size S32 included (220kW).
– Operating devices: Set of operating devices on the front door, including a potentiometer, a mushroom-head push-button and a key-operated selector switch. Available for IP54 models only.
– Sinus Penta Parallel, configuration in parallel of 2 or 3 drives to control a single motor; available for size S41, S42, S51, S52. Benefits given by this solution: lower cost; improved stock management—the product may be modified for the connection in parallel by way of a special kit available on demand; easier repairings/replacement; space-saving.
– 12-pulse or 18-pulse power supply: from size S41 up, power supply may be 12-pulse/18-pulse to reduce the current harmonic contents in the power supply line.
– The PENTA MARINE drive in Regenerative configuration enables bidirectional interface with the mains, with power factor = 1 (true AFE application). Its true sine wave also enables dramatically reducing the THD below 5% and obtaining THDV = 0.
– Extensive range of external accessories: input and output filters, encoder, resolver, braking resistors, etc.
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
– Fully made of steel
– Wide range of operating temperature with no derating: -10°C to 55°C
– Tropicalized boards (conformal coating)
– Overload up to 200% for 2 minutes every 20 minutes or 1 minute every 10 minutes (depending on the drive model)
– Peak current up to 240% for 3 seconds
– Input frequency: 50-60Hz
– Integrated RS485 serial port, MODBUS RTU communications protocol
– Wide range of integrated protection features
– Output frequency adjustment from 0 to 599Hz (up to 1000Hz on demand)
– Degree of protection IP00, IP20, IP54
– Parallel configuration also available
– Smart cooling system – Through-panel assembly for the segregation of the servoventilation channels
– SINUS PENTA CABINET/BOX in electrical cabinet also available
– Compatible with TN-S, TN-C, TN-CS and TT networks Compatibility with IT networks available on demand
– Manufactured with top quality materials, totally Made in Italy
– Integrated Safe Torque Off (STO) function, Sil3 and EN ISO 13849-1, PL-d
– Certification: CE, UL, EAC, RCM
– Compatible with the Easy Harmonics software computing harmonic current damping
– Compatible with the “REMOTE DRIVE” software for the remote control of the device
As we supply industrial equipment, product availability and delivery timelines may vary. Once your order is placed, our sales team will contact you within 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
