Industrial spare parts & engineering solutions since 2001.
SICK 1111725 type: DBS60E-THFK01024 Incremental encoder
Technical Datasheets / Product Documentations
- No technical documentation is available for this product at the moment. Contact us for more information.
| Brand |  |
| Category | Encoder |
| Product Name | SICK 1111725 type: DBS60E-THFK01024 Incremental encoder |
| Product Code | DBS60E-THFK01024 |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
SICK products, including SICK 1111725 type: DBS60E-THFK01024 Incremental encoder, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine SICK parts at competitive prices. Even if SICK 1111725 type: DBS60E-THFK01024 Incremental encoder is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
- PERFORMANCE
Pulses per revolution 1,024 Measuring step ≤ 90° electric/pulses per revolution Measuring step deviation ± 18° / pulses per revolution Error limits Measuring step deviation x 3 Duty cycle ≤ 0.5 ± 5 % Initialization time < 5 ms 1) - 1) Valid signals can be read once this time has elapsed.
- INTERFACES
Communication interface Incremental Communication Interface detail TTL 1) - 1) Output level depends on the supply voltage.
- ELECTRICAL DATA
Connection type Male connector, M12, 8-pin, radial Power consumption ≤ 0.5 W (without load) Supply voltage 4.5 ... 30 V Load current ≤ 30 mA, per channel Output frequency + 300 kHz 1) Reference signal, number 1 Reference signal, position 90°, electric, logically gated with A and B Reverse polarity protection ✔ Short-circuit protection of the outputs ✔ 2) MTTFd: mean time to dangerous failure 500 years (EN ISO 13849-1) 3) - 1) Up to 450 kHz on request.
- 2) Short-circuit opposite to another channel, US or GND permissable for maximum 30 s.
- 3) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
- MECHANICAL DATA
Mechanical design Through hollow shaft, Front clamp Shaft diameter 15 mm Flange type / stator coupling 2-sided stator coupling, slot, screw hole circle 63–83 mm Weight + 0.25 kg 1) Shaft material Stainless steel Flange material Aluminum Housing material Aluminum Start up torque + 0.5 Ncm (+20 °C) Operating torque 0.4 Ncm (+20 °C) Permissible shaft movement, axial static/dynamic ± 0.5 mm / ± 0.2 mm 2) Permissible shaft movement, radial static/dynamic ± 0.3 mm / ± 0.1 mm 2) Moment of inertia of the rotor 50 gcm² Bearing lifetime 3.6 x 109 revolutions Angular acceleration ≤ 500,000 rad/s² - 1) Based on an encoder with a male connector outlet or a cable with a male connector outlet.
- 2) Not apllicable for stator coupling type C and K.
- AMBIENT DATA
EMC According to EN 61000-6-2 and EN 61000-6-3 Enclosure rating IP65, housing side (according to IEC 60529) 1)
IP65, shaft side (according to IEC 60529)
Permissible relative humidity 90 % (condensation of the optical scanning not permitted) Operating temperature range –30 °C ... +100 °C, at maximum 3,000 pulses per revolution 2) Storage temperature range –40 °C ... +100 °C, without package Resistance to shocks 250 g, 3 ms (according to EN 60068-2-27) Resistance to vibration 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) - 1) With mating connector fitted.
- 2) These values relate to all mechanical versions including recommended accessories unless otherwise noted.
- CLASSIFICATIONS
ECl@ss 5.0 27270501 ECl@ss 5.1.4 27270501 ECl@ss 6.0 27270590 ECl@ss 6.2 27270590 ECl@ss 7.0 27270501 ECl@ss 8.0 27270501 ECl@ss 8.1 27270501 ECl@ss 9.0 27270501 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113
Frequently Asked Questions
Frequently asked questions about SICK 1111725 type: DBS60E-THFK01024 Incremental encoder by SICK. Imtek Engineering is ready to assist you in sourcing SICK 1111725 type: DBS60E-THFK01024 Incremental encoder from SICK in United States.
United StatesImtek Engineering sources genuine SICK products through trusted supply channels and supplies them to customers in United States at competitive prices.
