SKF TMHS 100 Advanced Hydraulic Spindle
SKF
Product Code: TMHS 100
Brand: SKF
GET OFFER: info@imtek.com.tr
Description for SKF TMHS 100 Advanced Hydraulic Spindle
Effortless withdrawal force generation The SKF advanced hydraulic spindles TMHS 75 and TMHS 100 generate a high pulling force with very little effort compared to the standard mechanical spindles. They dramatically reduce the time needed to dismount a bearing or other component. The spindles are equipped with integrated hydraulic pumps for force generation. Maximum pulling forces are limited by special safety valves and the hydraulic oil will remain inside the pump. Integrated hydraulic cylinder, pump and spindle - no separate pump is required Safety valve helps prevent overloading the spindle and the puller in case excessive force is applied Spring-loaded centre point in the nosepiece allows easy centring of the puller on the shaft without damaging shaft centre point Hand lever with ergonomic grip can be rotated 360° Hardened and chrome plated piston with spring return function Extension pieces included allows easy adaptation for the required pulling lengthSKF force generator selection PullerMechanicalspindleTMHS 75TMHS 100TMMA 60X TMMA 80X O TMMA 120O TMMA 75HX TMMA 100HX TMMA 75H/SETX TMMA 100H/SETX TMBS 50EX TMBS 100EX TMBS 150EX TMHC 110EX TMHP 10EX X = Supplied standard with puller O = Optional accessory for puller Technical data DesignationTMHS 75TMHS 100Contents1 × hydraulic spindle 1 × hydraulic spindle 2 × extension pieces; 50 and 100 mm (2.0 and 3.9 in.) 3 × extension pieces; 50, 100 and 150 mm (2.0, 3.9 and 5.9 in.) 1 × nosepiece 1 × nosepiece Maximum withdrawal force 75 kN (8,4 ton US) 100 kN (11.2 ton US) Piston stroke 75 mm (3.0 in.) 80 mm (3.1 in.) Body thread UN 11/4 × 12 UN 11/2 × 16 Nose piece diameter 35 mm (1.4 in.) 30 mm (1.2 in.) Maximum reach 229 mm (9.0 in.) 390 mm (15.4 in.) Weight 2,7 kg (6.0 lb) 4,5 kg (10.0 lb) DesignationDesciptionSuitable forTMHS 5TSet containing extension pieces 50 and 100 mm and the nosepieceTMHS 75TMHS 8TSet containing extension pieces 50, 100 and 150 mm and the nosepieceTMHS 100TMHS 100-1 Advanced hydraulic spindle, 100 kN, spindle onlyTMHS 100Recommended Products For SKF
Topworx 73-14573F4 - 5/8Inch, SPDT, End Sensing, 144Inch Hi-Temp 18 Gauge, 303 Stainless Steel, Model 73 GO Switch
Eurotherm Ero Electronic TKS931123000 Process Control Equipment Eurotherm Ero Electronic TKS931123000 Process Control Equipment