Bartec 07-3323-1200 PUSH BUTTON MODULE

PUSH BUTTON MODULE

BARTEC Operational Instructions – ComEx switch module
ComEx switch module For panel- and railmounted installation Explosion protection
Notified Body Number
0044
Approved Body Number
2503
ATEX/UKEX Ex protection type
II 2G Ex db eb IIC Gb I M2 Ex db eb I Mb
ATEX/UKEX certificate number
CML 22 ATEX 1135 U
CML 22 UKEX 1136 U
IECEx Ex protection type
Ex db eb IIC Gb Ex db eb I Mb
IECEx certificate number
IECEx CML 22.0014 U
CEC (UL Mark)
Ex db eb IIC Gb Class I, Division 2, Groups A, B, C, D
NEC (UL Mark)
Class I, Zone 1, AEx db eb IIC Gb Class I, Division 2, Groups A, B, C, D
UL certificate number
UL E184198
Service temperature
-55 °C to +85 °C (-67 °F to +185 °F)
For further approvals and certificates, see bartec.com
Technical data
Note on instructions When working in hazardous areas, the safety of personnel,
environment and equipment depends on compliance with the relevant safety regulations. The people in charge of installation
and maintenance bear a special responsibility. It is essential that they have an exact knowledge of the applicable rules and
regulations.
The instructions provide a summary of the most important safety measures and must be read by everyone working with the product
so that they will be familiar with the correct handling of the product.
Max. ambient temperature only with protection by flameproof enclosure "d"
+85 °C (+185 °F)
Degree of protection
IP20 acc. to EN 60529
Rated insulation voltage
Ui = 690 V Ue = 400 V
Rated voltage
400 V
400 V
230 V
110 V
60 V
Utilisation category
AC-12
AC-15
AC-15
DC-13
DC-13
Rated operating currents
16 A
10 A
16 A
1A
2A
The instructions have to be kept for future reference and must be available throughout the expected life of the product.
Conventional thermal current Ithe
(+40 °C) (+104 °F) Ithe =16 A (+60 °C) (+140 °F) Ithe =11 A
Contact options
Description
contacts with positive break operation for silver contacts (self-cleaning)
1 NC and 1 NO or 2 NC or 2 NO
Contact material
AgSnO2 or AgSnO2 with gold coating
Enclosure material
Thermoplastic
Connection
0.75 mm² - 2.5 mm²/18 AWG - 12 AWG
Electrical load Silver contacts with gold coating
min. DC 24 V - 4 mA max. DC 24 V - 100 mA For alternating current, these values are not to
be interpreted as peak values.
Mechanical life
>106 switching cycles
Storage and transport temperature
-55 °C to +85 °C (-67 °F to +185 °F)
Weight
Panelmounted Railmounted
Mounting
Panelmounted (locked to control and signal device actuators 07-3400 by bayonet lock)
Railmounted (latched on mounting rail NS 35 x 7.5)
Shock resistance
DIN EN/IEC 60068-2-27, 30 g 18 ms
The ComEx Switch module can be used in almost all potentially explosive areas, where machine functions need to be triggered
by a button or a switch. ComEx Switch modules are flexible in use and can be combined with a variety of Control and signal device
actuators 07-3400-*.
All contacts of the ComEx switch module are self-cleaning, and the NC contacts feature positive opening. The connecting cable
is connected to the ComEx switch module via screw terminals.
The ComEx switch modules offer the option of simple and fast mounting on a rail- or a panel mounted installation per direct
mounting to the ComEx actuator. The ComEx switch modules are developed and certified for globally market
Technical data subject to change without notice
2/8
approx. 110 g approx. 70 g
01-3322-7D0002 / REV-A-06-2024 / ESS-463637