EUROTHERM 2216e Temperature Controller Programmer

Installation and Operation Handbook
Safety and EMC Information
Technical Specification Input General
Thermocouple
Range
+100mV and 0 to 10Vdc (auto ranging)
Sample rate
9Hz (110mS)
Calibration accuracy
0.25% of reading, ±1 LSD, ±1°C/F
Resolution
<1μV for ± 100mV range, <0.2mV for 10Vdc range
Linearisation accuracy
<0.1% of reading
Input filter
1.0 to 999.9 secs
Zero offset
User adjustable over the fully display range
Types
Refer to Sensor inputs and display ranges table
Cold junction compensation
Automatic compensation typically >30 to 1 rejection of ambient temperature change (incorporates Instant
Accuracy™ cold junction sensing technology).
External references 32, 113 and 122°F (0, 45 and 50°C)
RTD/PT100
Process
Type
3-wire, Pt100 DIN43760
Bulb current
0.2mA
Lead compensation
No error for 22 ohms in all 3 leads
Linear
-9.99 to 80.00mV, 0 to 20mA or 0 to 10Vdc (All configurable between limits)
Rating: 2-pin relay
Min: 12V, 100mA dc Max: 2A, 264Vac resistive
Outputs Relay
Rating: change-over, alarm relay Min: 6V, 1mA dc Max: 2A, 264Vac resistive
Application Logic
Heating, cooling or alarms
Rating
18Vdc at 24mA (non-isolated)
Application
Heating, cooling or alarms
PDS mode 1: SSRx Load Doctor™ logic heating with load failure alarm
PDS mode 2: SSRx Enhanced Load Doctor™ logic heating with load/SSC failure alarms and load current
display
Triac Analog
Rating
1A, 30 to 264Vac resistive
Application
Heating or cooling
Range
Isolated, 0 to 20mA 0 to 10Vdc (configurable between limits)
Application
Heating or cooling
2216e Controller
12-5