Foxboro Eckardt IDP10-TF1C01E-L1 Transmitter

PSS 2A-1C14 C Page 14
OPERATING, STORAGE, AND TRANSPORTATION CONDITIONS
O P E R AT I N G, S T O R A G E , A N D T R A N S P O RTAT I ON C O N D I T I O N S
Influence
Reference Conditions
Normal Operating Conditions (a) (b)
Operative Limits (a) (b)
Process Connection Temp.
with Silicone Fill Fluid
24 ±2°C (75 ±3°F)
-29 to + 82°C (-20 to +180°F)
-46 and +121°C (c) (-50 and +250°F) (c)
Not Applicable
24 ±2°C (75 ±3°F)
-29 to + 82°C (-20 to +180°F)
-29 and +121°C (-20 and +250°F)
Not Applicable
with Inert Fill Fluid Electronics Temperature (d)
24 ±2°C (75 ±3°F)
-29 to + 82 °C (e) (-20 to +180 °F) (e)
-40 and +85°C (c) (e) (-40 and +185°F) (c)(e)
-54 and +85°C (-65 and +185°F)
Relative Humidity (f)
50 ±10%
0 to 100%
0 and 100%
0 and 100% Noncondensing
Supply Voltage – mA Output
30 ±0.5 V dc
11.5 to 42 V dc (g)
11.5 and 42 V dc (g)
Not Applicable
650 Ω
0 to 1450 Ω
0 and 1450 Ω
Not Applicable
Output Load – mA Output Vibration
Mounting Position
1 m/s2 (0.1 “g”) 6.3 mm (0.25 in) Double Amplitude:
from 5 to 15 Hz with Aluminum Housing from 5 to 9 Hz with 316 ss Housing
0 to 30 m/s2 (0 to 3 “g”) from 15 to 500 Hz with Aluminum Housing 0 to 10 m/s2 (0 to 1 “g”) from 9 to 500 Hz
with 316 ss Housing Upright or Horizontal (h)
No Limit
Transportation/ Storage Limits
11 m/s2 (1.1 “g”) from 2.5 to 5 Hz (in Shipping Package)
Not Applicable
a. When Structure Codes 78/79 (pvdf inserts) are used, maximum overrange is 2.1 MPa (300 psi), and temperature limits are -7 and
+82°C (20 and 180°F); when DIN Construction Options D2/D4/D6/D8 are used, temperature limits are 0 and 60°C (32 and 140°F).
b. Normal Operating Conditions and Operative Limits are defined per ANSI/ISA 51.1-1979 (R1993).
c. Selection of Option -J extends the low temperature operative limit of transmitters with silicone filled sensors down to -50°C (-58°F).
Performance is not assured below -29°C. Sensor damage may occur if process is frozen.
d. The operative limits of the standard LCD indicator are -29 and +85°C (-20 and +185°F), and the normal operating conditions are
-20 to +82°C (-4 to +180°F). Although the LCD indicator will not be damaged at any temperature within the “Transportation/
Storage Limits”, updates will be slowed and readability decreased at temperatures outside the “Normal Operating Conditions”.
e. Refer to the Electrical Safety Specifications section for a restriction in ambient temperature with certain electrical certifications.
f.
With topworks cover on and conduit entrances sealed.
g. 11.5 V dc can be reduced to 11 V dc by using a plug-in shorting bar; see “Supply Voltage Requirements” section and Figure 18.
h. Sensor process wetted diaphragms in a vertical plane.