2001'den bu yana endüstriyel yedek parça ve mühendislik çözümleri.
ALMANYA'dan dünyanın her yerine hızlı teslimat
Geniş Ödeme SeçenekleriBirden fazla ödeme seçeneği
Senseca GOF130CU-GE Surface Probe For Solid Surfaces
Teknik Veri Sayfaları / Ürün Dokümantasyonları
| Marka |  |
| Kategori | Prob |
| Ürün Adı | Senseca GOF130CU-GE Surface Probe For Solid Surfaces |
| Ürün Kodu | GOF130CU-GE |
Bizimle iletişime geçin! 24 iş saati içinde (hafta sonu ve tatiller hariç) stok durumunu ve tahmini teslim süresini bildiriyoruz.
Ürün Açıklaması
Senseca markalı Senseca GOF130CU-GE Surface Probe For Solid Surfaces ürünleri, paralel ithalat yöntemi ile ülkenize temin edilmektedir. İmtek Mühendislik olarak, orijinal Senseca ürünlerini rekabetçi fiyatlar ve hızlı teslimat seçenekleriyle müşterilerimize ulaştırmaktayız. Web sitemizde Senseca GOF130CU-GE Surface Probe For Solid Surfaces ürün kodu yer almasa dahi, Senseca ürün gamına ait tüm kalemler için fiyat teklifi talebinde bulunabilirsiniz; ekibimiz en kısa sürede teklifinizi hazırlayacaktır.
Surface Probe For Solid Surfaces
HANDHELD INSTRUMENT | TEMPERATURE
Accuracy Pt100:
Sensor accuracy acc. to DIN EN 60751
DIN cl. B: (area of validity: -50 ... +500 °C)
DIN cl. A: (area of validity: -30 ... +300 °C)
DIN cl. AA = 1/3 DIN cl. B: (area of validity: 0 ... +150 °C) 1/10 DIN cl. B: (area of validity: -50 ... +100 °C)
±0.3 °C at 0 °C ±0.15 °C at 0 °C ±0.1 °C at 0 °C ±0.03 °C at 0 °C
Upcharges special designs: (Deviations are possible based on the construction)
longer probe tube: upcharge per further starting 100 mm longer cable (PVC): upcharge per further starting 100 mm
other cable material upon request teflon covered probe tube (for probes up to 200 mm)
(for probes used in acids and salt water, upper temperature range 250 °C)
waterproof probe handle (only possible with PVC cable -20 ... +105 °C) higher sensor accuracy: DIN cl. AA, for Pt100, tolerances: 0.1 °C at 0 °C
higher sensor accuracy:
1/10 DIN cl. B, for Pt100-probes, tolerances: 0.03 °C at 0 °C basic fee for custom made probe
GTF 401 / 1.6
Art. no. 602066 Immersion probe with sheath element Pt100 -50 ... +400 °C, DIN cl. B
V4A sheath tube bendable, Ø 1.6 mm, plastic handle, antikink connection,
approx. 1 m 4-pole cable, mini-DIN plug Response time T90 -50 °C +400 °C
Art. no. 600377 Immersion probe for liquids / gases -50 ... +400 °C, DIN cl. B
GTF 401 1/10 DIN
Art. no. 600379 Immersion probe with sheath element Pt100 -50 ... +400 °C, 1/10 DIN class B (±0.03 °C at 0 °C)
GTF 401 DIN cl. AA
Art. no. 600378 Immersion probe for liquids / gases -50 ... +400 °C, DIN cl. AA (±0.1 °C at 0 °C)
stainless steel tube (V4A) Ø 3 mm, plastic handle, anti-buckling glanding,
approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug Response time T90
non-corrosive stainless steel tube (V4A) Ø 3 mm, plastic handle, anti-buckling
glanding, approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug Response time T90
-50 °C +400 °C
water 0.4 m/s approx. 10 s, air 2 m/s approx. 40 s
GTF 35
-200 °C +600 °C
-200 °C +600 °C
Art. no. 600391 Immersion probe for liquids / gases -50 ... +400 °C, DIN cl. B
non-corrosive stainless steel tube (V4A) Ø 3 mm, shrink sleeving, approx.
1 m 4-wire PVC cable, 4-pin miniature DIN-type plug Response time T90 -50 °C
+400 °C
-50 °C +400 °C
water 0.4 m/s <2 s, air 2 m/s approx. 25 s
GTF 601
Art. no. 600387 Immersion probe with sheath element Pt100 -200 ... +600 °C, DIN cl. B
GTF 601 DIN cl. AA
Art. no. 600388 Immersion probe with sheath element Pt100 -200 ... +600 °C, DIN cl. AA (±0.1 °C at 0 °C)
V4A-flecible jacket tube, Ø 3 mm, plastic handle, anti-buckling glanding,
approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug
water 0,4 m/s approx. 10 s, air 2 m/s approx. 40 s
Response time T90
GES 401
Art. no. 600384 Insertion probe for soft media -50 ... +400 °C, DIN cl. B
water 0.4 m/s <5 s, air 2 m/s approx. 60 s
SOFTWARE
-50 °C +400 °C
-50 °C +400 °C
-25 °C +70 °C
GES 401 DIN cl. AA
Art. no. 600385 Insertion probe for soft media -50 ... +400 °C, DIN cl. AA (±0.1 °C at 0 °C)
water 0.4 m/s <5 s, air 2 m/s approx. 60 s
GLF 401 Mini
Art. no. 600395 Environmental temperature probe without cable, -25 ... +70 °C, DIN cl. A
ACCESSORIES
-50 °C +400 °C
GTF 401
Advantages of sheath element Pt100: • high temperature resistance
• sheath cable is bendable
• high shock resistance
• high service life
HANDHELD INSTRUMENTS
SUITABLE PT100 MEASURING PROBE (4-WIRE)
V4A tube Ø 1.6 mm, FL = approx. 40 mm, 4-pin mini DIN-type plug Response time T90
Response time T90 -70 °C +250 °C
water 0.4 m/s approx. 10 s, air 2 m/s approx. 40 s
GES 20-P4 DIN Kl. A
Art. no. 414061 Core temperature- / food probe with compact teflon handle
-70 ... +250 °C, Pt100 cl. A
-50 °C +200 °C
air 2 m/s approx. 25 s
GOF 401 Mini
Art. no. 600396 Surface probe, frontal ceramic surface -50 ... +200 °C, DIN cl. B
NEW!
GES 20-P4 DIN cl. B
Art. no. 413543 Core temperature- / food probe with compact teflon handle
-70 ... +250 °C, Pt100 cl. B
Frontal Pt100 ceramic plate 2 x 2.3 mm, V4A tube Ø 2.2 mm, approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug
Response time T90
approx. 15 s
V4A tube with narrow insertion tip with 1.5 mm diameter, small Teflon handle, stainless steel anti-kink protection, 1 m Teflon cable, 4 pin mini-DIN plug connector
Response time T90
water 0.4 m/s <1 s, air 2 m/s approx. 12 s
www.greisinger.de | 19
ALARM / PROTECTION, LEVEL
stainless steel tube (V4A) Ø 3 mm with needle type prod, plastic handle, antibuckling glanding, approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug
Accuracy Pt100:
Sensor accuracy acc. to DIN EN 60751
DIN cl. B: (area of validity: -50 ... +500 °C)
DIN cl. A: (area of validity: -30 ... +300 °C)
DIN cl. AA = 1/3 DIN cl. B: (area of validity: 0 ... +150 °C) 1/10 DIN cl. B: (area of validity: -50 ... +100 °C)
±0.3 °C at 0 °C ±0.15 °C at 0 °C ±0.1 °C at 0 °C ±0.03 °C at 0 °C
Upcharges special designs: (Deviations are possible based on the construction)
longer probe tube: upcharge per further starting 100 mm longer cable (PVC): upcharge per further starting 100 mm
other cable material upon request teflon covered probe tube (for probes up to 200 mm)
(for probes used in acids and salt water, upper temperature range 250 °C)
waterproof probe handle (only possible with PVC cable -20 ... +105 °C) higher sensor accuracy: DIN cl. AA, for Pt100, tolerances: 0.1 °C at 0 °C
higher sensor accuracy:
1/10 DIN cl. B, for Pt100-probes, tolerances: 0.03 °C at 0 °C basic fee for custom made probe
GTF 401 / 1.6
Art. no. 602066 Immersion probe with sheath element Pt100 -50 ... +400 °C, DIN cl. B
V4A sheath tube bendable, Ø 1.6 mm, plastic handle, antikink connection,
approx. 1 m 4-pole cable, mini-DIN plug Response time T90 -50 °C +400 °C
Art. no. 600377 Immersion probe for liquids / gases -50 ... +400 °C, DIN cl. B
GTF 401 1/10 DIN
Art. no. 600379 Immersion probe with sheath element Pt100 -50 ... +400 °C, 1/10 DIN class B (±0.03 °C at 0 °C)
GTF 401 DIN cl. AA
Art. no. 600378 Immersion probe for liquids / gases -50 ... +400 °C, DIN cl. AA (±0.1 °C at 0 °C)
stainless steel tube (V4A) Ø 3 mm, plastic handle, anti-buckling glanding,
approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug Response time T90
non-corrosive stainless steel tube (V4A) Ø 3 mm, plastic handle, anti-buckling
glanding, approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug Response time T90
-50 °C +400 °C
water 0.4 m/s approx. 10 s, air 2 m/s approx. 40 s
GTF 35
-200 °C +600 °C
-200 °C +600 °C
Art. no. 600391 Immersion probe for liquids / gases -50 ... +400 °C, DIN cl. B
non-corrosive stainless steel tube (V4A) Ø 3 mm, shrink sleeving, approx.
1 m 4-wire PVC cable, 4-pin miniature DIN-type plug Response time T90 -50 °C
+400 °C
-50 °C +400 °C
water 0.4 m/s <2 s, air 2 m/s approx. 25 s
GTF 601
Art. no. 600387 Immersion probe with sheath element Pt100 -200 ... +600 °C, DIN cl. B
GTF 601 DIN cl. AA
Art. no. 600388 Immersion probe with sheath element Pt100 -200 ... +600 °C, DIN cl. AA (±0.1 °C at 0 °C)
V4A-flecible jacket tube, Ø 3 mm, plastic handle, anti-buckling glanding,
approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug
water 0,4 m/s approx. 10 s, air 2 m/s approx. 40 s
Response time T90
GES 401
Art. no. 600384 Insertion probe for soft media -50 ... +400 °C, DIN cl. B
water 0.4 m/s <5 s, air 2 m/s approx. 60 s
SOFTWARE
-50 °C +400 °C
-50 °C +400 °C
-25 °C +70 °C
GES 401 DIN cl. AA
Art. no. 600385 Insertion probe for soft media -50 ... +400 °C, DIN cl. AA (±0.1 °C at 0 °C)
water 0.4 m/s <5 s, air 2 m/s approx. 60 s
GLF 401 Mini
Art. no. 600395 Environmental temperature probe without cable, -25 ... +70 °C, DIN cl. A
ACCESSORIES
-50 °C +400 °C
GTF 401
Advantages of sheath element Pt100: • high temperature resistance
• sheath cable is bendable
• high shock resistance
• high service life
HANDHELD INSTRUMENTS
SUITABLE PT100 MEASURING PROBE (4-WIRE)
V4A tube Ø 1.6 mm, FL = approx. 40 mm, 4-pin mini DIN-type plug Response time T90
Response time T90 -70 °C +250 °C
water 0.4 m/s approx. 10 s, air 2 m/s approx. 40 s
GES 20-P4 DIN Kl. A
Art. no. 414061 Core temperature- / food probe with compact teflon handle
-70 ... +250 °C, Pt100 cl. A
-50 °C +200 °C
air 2 m/s approx. 25 s
GOF 401 Mini
Art. no. 600396 Surface probe, frontal ceramic surface -50 ... +200 °C, DIN cl. B
NEW!
GES 20-P4 DIN cl. B
Art. no. 413543 Core temperature- / food probe with compact teflon handle
-70 ... +250 °C, Pt100 cl. B
Frontal Pt100 ceramic plate 2 x 2.3 mm, V4A tube Ø 2.2 mm, approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug
Response time T90
approx. 15 s
V4A tube with narrow insertion tip with 1.5 mm diameter, small Teflon handle, stainless steel anti-kink protection, 1 m Teflon cable, 4 pin mini-DIN plug connector
Response time T90
water 0.4 m/s <1 s, air 2 m/s approx. 12 s
www.greisinger.de | 19
ALARM / PROTECTION, LEVEL
stainless steel tube (V4A) Ø 3 mm with needle type prod, plastic handle, antibuckling glanding, approx. 1 m 4-wire PVC cable, 4-pin miniature DIN-type plug
Sık Sorulan Sorular
Senseca GOF130CU-GE Surface Probe For Solid Surfaces (Senseca) ürünü hakkında sıkça sorulan sorular aşağıda yer almaktadır. Senseca markasına ait Senseca GOF130CU-GE Surface Probe For Solid Surfaces ürününü United States temin etmenize yardımcı olmaktan memnuniyet duyarız.
United Statesİmtek Mühendislik, Senseca ürünlerini güvenilir kaynaklardan temin ederek United States orijinal ve kaliteli Senseca ekipmanlarını rekabetçi fiyatlarla sunmaktadır.
