Industrial spare parts & engineering solutions since 2001.
Vega VEGAVIB 63 Vibrating Level Switch
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Switch |
| Product Name | Vega VEGAVIB 63 Vibrating Level Switch |
| Product Code | Unspecified |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Vega products, including Vega VEGAVIB 63 Vibrating Level Switch, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Vega parts at competitive prices. Even if Vega VEGAVIB 63 Vibrating Level Switch is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
VEGAVIB 63
Relay (DPDT) Vibrating level switch with tube extension for granuled bulk solids
Technical data Process pressure Process temperature Density
Ambient temperature on the housing
• Minimum time and cost expenditure due to simple setup without medium
• Reliable function due to product-independent switching point
-40 … +80 °C (-40 … +176 °F)
Process fitting
Threads from G1, 1 NPT, flanges from
DN 32, 1½", hygienic fittings
Power consumption
Your benefit
> 0.02 g/cm³ (0.0007 lbs/in³)
-40 … +80 °C (-40 … +176 °F)
Operating voltage
VEGAVIB 63 is used as a level switch in granular and coarse-grained bulk solids. The VEGAVIB 63 detects reliably and accurately when the
min. or max. level is reached. The smooth surface of the vibrating rod, without corners and edges, avoids jamming of the bulk solid and is
easy to clean. The position of the switching point is determine via the tube extension.
-50 … +250 °C (-58 … +482 °F)
Storage and transport temperature Hysteresis
Application area
-1 … +16 bar/-100 … +1600 kPa (-14.5 … +232 psig)
Switching delay
SIL qualification
approx. 2 mm (0.08 in) with vertical installation
20 … 253 V AC, 50/60 Hz; 20 … 72 V DC
1 … 8 VA (AC), approximately 1.5 W (DC) When being covered: 0.5 s, when being
uncovered 1 s Optionally up to SIL2
Materials The wetted parts of the instrument are made of stainless steel 316L.
The supplied process seal is made of Klingersil C-4400.
You will find a complete overview of the available materials and seals in
the "configurator" on our homepage at www.vega.com/configurator.
Housing versions
• Low maintenance costs
The housings are available in plastic, stainless steel or Aluminium.
They are available with protection ratings up to IP 67.
Function
Electronics versions
The vibrating rod of VEGAVIB 63 is energized by a piezo drive to vibrate
at its resonance frequency. If the medium covers the vibrating rod, the amplitude is damped. The electronics detects this change and converts
it into a switching command. A reliable function in granulated bulk solids
is ensured by the ideal rod design.
The instruments are available in different electronics versions. Apart from the versions with transistor output, contactless electronic switch
and relay output, a two-wire version for connection to a signal conditioning instrument and a NAMUR version are also available.
Approvals The instruments are suitable for use in hazardous areas and are approved, for example, according to ATEX, FM, CSA and IEC.
You can find detailed information on the existing approvals in the "configurator" on our homepage at www.vega.com/configurator.
VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com
VEGAVIB 63 - 34640-EN-151205
Frequently Asked Questions
Frequently asked questions about Vega VEGAVIB 63 Vibrating Level Switch by Vega. Imtek Engineering is ready to assist you in sourcing Vega VEGAVIB 63 Vibrating Level Switch from Vega in United States.
United StatesImtek Engineering sources genuine Vega products through trusted supply channels and supplies them to customers in United States at competitive prices.
