Watson-Marlow 120 Series Benchtop Pumps with 400DM2 twin channel pumphead

The Watson-Marlow 120S/DM2 and 120U/DM2 pumps comprise a 400DM2 twin channel pumphead powered by a 120 variable speed or automatic drive. The pumphead accepts 0.8mm wall, three-bridge manifold tubing in sizes from 0.13 to 2.79mm internal diameter. The pump gives flow rates up to 36 ml/min.120 pumps have a compact footprint, saving valuable space in cleanroom, LAF and biosafety cabinet installations.120U: 0.1-100 rpm in 0.1 rpm increments. Manual remote control or automatic control via 4-20mA or 0-10V inputs. Speed scrolling, priming and keypad lock.120S: Manual control, 1-100 rpm in 1 rpm increments. Speed scrolling, priming and keypad lock.Flow rates 0.0001 to 36 ml/min at 30 psi (2 bar).Compact footprint requires minimal benchtop spaceSuperior speed control up to 1,000:1, ±1% set speed accuracy, repeatable flow400DM2 two channel pumphead accepts three-bridge manifold tubing onlyEfficient and intuitive to use, requiring minimal key pressesSmooth, wipedown case with no sharp edges to tear gloves and no bug traps. IP31 ingress protectionMaintenance-free, brushless DC motorThree year warrantyFermentation The 120 is the perfect pump for maximising yield in fermentation and cell culture applications. Ultra-compact and stackable for multiple feeds such as pH control, antifoam, nutrient and buffer addition, the 120 offers the ideal combination of size and technology to optimise your process.Single-use systems The new 120 pump is perfectly suited to single-use systems where no contamination can be accepted. Error-free tube change takes only seconds.Process validation The biopharm process requires accurate and repeatable pumping which is easy to validate. With an exceptional 1,000:1 speed range, the 120 delivers the flexibility and purity so vital to drug trials. A keypad lock secures your pumping parameters for constant and repeatable performance.400DM2 twin channel pumphead:The twin-channel 400DM2 pumphead uses three-bridge manifold tubing. Ideal for ultra-low-flow metering. Available for 120S and 120U drivesFlow rates from 0.0001 to 36 ml/min per channelPrecision-machined four roller aluminium rotorSmooth, precise flow114DV flip-top four roller pumphead The 114DV single-channel pumphead assures trouble-free continuous tube loading in seconds, high accuracy and repeatable flow. It accepts 1.6mm wall tubing in bores sizes 0.5mm to 4.8mm. Flow rates from 0.002 to 190 ml/min at 30 psi (2 bar)Single-channel pumphead with four rollers for smooth flowRecommended for continuous dutyModels with occlusion settings for standard 102R single-channel two roller pumphead The 102R single-channel pumphead with two-roller rotor is suitable for continuous silicone tubing. It accepts tubing in bore sizes 0.5mm to 4.8mm. Flow rates from 0.003 to 54 ml/min at 30 psi (2 bar)Single-channel two roller pumpheadSprung rotor to maximise tube life and flow precision. 400DM3 three-channel pumphead The three-channel 400DM3 pumphead uses three-bridge manifold tubing. Ideal for ultra-low-flow metering. Available for 120S and 120U drives. Flow rates from 0.0001 to 36 ml/min per channelPrecision-machined four roller aluminium rotorSmooth, precise flow 400D1 single-channel pumphead The single-channel 400D1 pumphead accepts 1.6mm-wall tubing from 0.5mm to 4.0mm. This metering pumphead is familiar to users replacing older 101 and 400 series pumps with the 120. Suitable for 120S and 120U drives. Flow rates from 0.001 to 120 ml/minPrecision-machined four roller aluminium rotorQuick-release sprung tube clampsSmooth, precise flow