BECKHOFF EL2889 HD Ethercat Terminal,

The EL2889 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2889 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains 16 channels, whose signal states are displayed by LEDs. The terminal is particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2889. The power contacts are looped through.

The outputs are fed via the 0 V power contact in the EL2889. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.

The HD EtherCAT Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.

Technical dataEL2889Connection technology1-wireNumber of outputs16Nominal voltage24 V DC (-15 %/+20 %)Load typeohmic, inductive, lamp loadDistributed clocks–Max. output current0.5 A (short-circuit proof) per channelShort-circuit currenttyp. < 7 AReverse voltage protectionyesBreaking energy< 100 mJ/channelSwitching timestyp. TON: 50 µs, typ. TOFF: 200 µsCurrent consumption E-bustyp. 140 mAElectrical isolation500 V (E-bus/field potential)Current consumption power contactstyp. 30 mA + loadBit width in the process image16 outputsConfigurationno address or configuration settingConductor typessolid wire, stranded wire and ferruleConductor connectionsolid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriverRated cross-sectionsolid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²Weightapprox. 70 gOperating/storage temperature-25…+60 °C/-40…+85 °CRelative humidity95 %, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. class/installation pos.IP 20/variableApprovals/markingsCE, UL, ATEXEx markingII 3 G Ex nA IIC T4 Gc

暂时没有通用描述。