ESN Type 8434 Electronic Thermostat

In view of the option to specify the trigger value and the reset value in steps of 1°C within a wide measuring range (this must be specified explicitly when ordering), these thermostats (temperature sensors) or the 8434 series are especially suitable for applications that place high requirements concerning switching accuracy and reproducibility.

Technical data

Dimensions

Ø 27 mm, L approx. 155 mm; see

 

figure

Housing

Stainless steel / PA; protection type:

 

IP 67

El. connection

Quick-connection system

Wire cross-section

1 to 1.5 mm2 (strands Ø 0.2 mm)

Wire insulation

PVC or PE is permissible

Wire external diameter

 

Two-core cable sensor

permitted 5.6 - 8.0 mm (PG 11)

Three-core cable sensor

permitted 5.6 - 8.5 mm (PG 13.5)

Ambient temperature

-30°C to +80°C

Switching point tem-

-30°C to +80°C

perature

 

Hysteresis

1°C

Note

The switching point tempera-

 

ture and the hysteresis can be

 

programmed in steps of 1°C

 

(please specify when ordering)

Measuring error

max.: ±0.5°C

Function:

Two-core cable sensor

 

I = 20 mA if ?

? switching point temperature

 

I ? 2 mA if ?

 

? switching point temp. – hysteresis

 

? 8434 0-

 

I ? 2 mA if ?

 

? switching point temperature

 

I = 20 mA if ?

 

? switching point temp. – hysteresis

 

? 8434 1-

Three-core cable sensor

Output = H if ?

? switching point temperature

 

Output = L if ?

 

? switching point temp. – hysteresis

 

? 8434 0-

 

Output = L if ?

 

? switching point temperature

 

Output = H if ?

 

? switching point temp. – hysteresis

 

? 8434 1-

Two-core cable sensor

Supply voltage: 8 - 12 V DC

? 8434 02

(e.g.: Type 8582)

? 8434 12

Quiescent current: 2 mA

 

Signal current: 20 mA ±2 mA

 

(smaller values on request)

Three-core cable sensor

Supply voltage: 24 V DC (±20 %),

? 8434 03

quiescent current: < 7 mA

? 8434 13

Output: positive-switching

 

Voltage: H: Supply voltage - 1 V;

 

L: 0.5 V (RL = 10 k)

 

Current: 100 mA, resistant to short

 

circuits and overloads; Ik max. 1.5

Accessories: