Greyline Pulsar SF2 & Viper Sludge Blanket Detection Bundle

Pulsar’s Sludge Finder 2 is a controller and transducer system that provides reliable continuous sludge blanket level measurement. It is used in thousands of applications worldwide for detecting sludge blanket levels in primary, secondary, and tertiary settlement tanks either with stationary or traveling bridges, clarifiers, gravity thickeners, or sequencing batch reactor (SBR) systems.

The two-part system includes a Viper Transducer which is purposely designed for sludge blanket level measurement. This purpose-built sludge level sensor uses sonar technology. It is submerged into the liquid and detects the echoes from the material - any distinct density changes are reflected back to the transducer. The time taken for the echo to return is transmitted to the controller and the distance to the interface is calculated.

This bundle includes the Sludge Finder 2controller, Viper Transducer, and PC Suite Software with dongle.

Sludge Finder 2 Features

Easy Set-up

The Sludge Finder 2 controller is easy to install by following the on-screen menu driven set-up - simply follow the screen prompts to enter your application parameters and then the system automatically tracks the sludge blanket interface.

Flexible - User Specific

Sludge Finder 2 offers a wealth of different options depending on requirements for your application:

Single or dual sensor input

When using two sensor inputs one of the following are possible: 1) sludge interface levels of differing densities (e.g. FLOC and RAS layers) can be alarmed; 2) monitor two sludge tanks continuously; or 3) measure the water level for applications where a low level is possible and the Viper transducer becomes exposed.

Installation

Pulsar offer a variety of accessories to aid installation depending on your application requirements:

Flexible Arm - For applications with a travelling/rotating bridge or other objects that need to be avoided.Stainless steel or galvanised bracketryCabinet enclosure (IP66) to further protect the IP65 enclosure from outside weather conditions, direct sunlight and sheltered from any potential exposure to water ingress via cable glands, precipitation or the application itself.Communication

A variety of communication protocols are available depending on your requirements - Profibus or Modbus communications boards and a variety of radio telemetry transmitters and receivers (500m/1640ft line-of-sight) to help transmit signals to ‘top-end’ systems.

Software

Pulsar PC Software Suite offers specific Sludge Finder 2 software that can be used to record and save all the parameters from your sludge blanket level measurement application(s). All parameters can be changed and downloaded to the controller via your laptop and echo profiles can be viewed and saved or sent to Pulsar via email if technical support is required

Contact Greyline Instruments for specific recommendations in your application.

Sludge Blanket Detection Bundle