Grundfos 91835823 Sensor

sp
ms motors
mms
redi-flo2® and redi-flo4™
redi-flo3™ and cu 300
mp 204
4”, 6”, 8” and 10” submersible pumps
Stainless steel 4” and 6” submersible motors.
Stainless steel 6”, 8”, and 10” submersible motors.
Environmental pumps
Environmental pumps
Control and monitoring units
motor sizes
motor sizes
H [ft]
4” motor:
6” motor:
2000 1600
0.5 to 10 hp 7.5 to 40 hp
Applications The Grundfos MS submersible motors can be fitted on all Grundfos pumps and can be
used in the high-pressure booster modules, types BM and BMB.
1200 800 400 0 0
300
600
900
1200 1500 Q [US GPM]
technical data Flow, Q:
Head, H:
Liquid temp.:
Instal. depth:
max. 1,400 gpm max. 2,100 ft +32°F to +140°F max. 1968 ft
features and benefits
• Overprotection by means of a built-in Tempcon temperature transmitter
• Standardized NEMA head and shaft end
• Completely encapsulated in stainless steel
• Liquid cooled and has liquid lubricated bearings
• Variable frequency drive compatible motors
Applications The pumps are suitable for:
• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater de-watering
• Pressure boosting
• Industrial applications
• Domestic water supply
features and benefits
• High efficiency
• Stainless steel components provide long service life
• Motor protection via CU 3
• Variable frequency drive compatible motors
optional
• Motor protection via MP 204
• Performance data can be monitored via
CU 3/R100/PC Tool MP 204
20
optional
• Material variations available
control box sA-spm5 product range
• Standard: 0.5 hp to 5 hp
• Delux: 1.5 hp to 5 hp
• CSCR: .33 hp to 1 hp
enclosure
• NEMA Type 3R
• Gray epozy coated
• 18-gauge steel construction
features and benefits • • • • • • •
Pull handle disconnect Safety shield UL-recognized mallory start capacitor
UL-recognized general electric Voltage relay Progressive knockouts 0.5 hp to 1 hp PumpSaver ready
6” motor:
8” motor:
10” motor:
50 hp 40 to 150 hp 100 to 250 hp
H [ft]
H [ft]
Applications
500
600
• Monitoring and protection of pump installations
400
Applications
300
The Grundfos MS submersible motors can be fitted on all Grundfos pumps and is for
200
use in standard groundwater systems.
100
features and benefits
• Standardized NEMA head and shaft end on 6 and 8 inch. Keyed shaft for Grundfos pumps on 10 inch
• Built in port for pt100 temperature probe
• Wet wound motor for greater cooling
• Variable frequency drive compatible motors
optional
• All stainless version in 316 or 904L
500
400
RediFlo4™
features and benefits
300
• Protection against dry running, motor over temperature, overload, overvoltage,
undervoltage, current and phase imbalance
• Constant monitoring of power consumption
200 Redi-Flo2®
100
0
0 0
10
20
30
40 50 Q [US GPM]
0
10
redi-flo2 technical data
technical data
Flow, Q:
Head, H:
Liquid temp.:
Flow, Q:
Head, H:
Liquid temp.:
Instal. depth:
max. 10.5 gpm max. 312 ft +32°F to +95°F
redi-flo4 technical data Flow, Q:
Head, H:
Liquid temp.:
max. 50 gpm max. 600 ft +32°F to +104°F
Applications The pumps are suitable for:
• Sampling and purging
• Remediation
• De-watering
redi-flo2 features and benefits
20
30
40 50 Q [US GPM]
max. 42 gpm max. 640 ft +32°F to +104°F max. 500 ft
The pumps are suitable for:
• Pumping up contaminated groundwater
• Sampling
• Remedial pumping
• De-watering
features and benefits sQe-ne
• All of the features of the SQE, but designed for environmental applications
• All 316 SS construction
• Inert composites
redi-flo4 features and benefits
redi-flo3
(Trademarks and Tradenames mentioned herin are
• Connection to large control systems via bus communication
• Connection of sensors enabling control based on sensor signals
• Configure setup and monitor operating data via R100
Applications
• Light and compact design
• Fits into 2“ boreholes
• Provides precise, accurate, and reproducible groundwater samples
• Constructed of virgin Teflon®
• Fit into 4” boreholes
• All stainless steel construction
optional
• External sensor control of pump
• Flexible configuration capabilities
• Monitoring, configuration and control via R100 or PC Tool CU 300
the properties of their respective owners).
21