TECHNICAL SPECIFICATIONS
ø 4 mm ø 5 mm
Switching pressure ranges 20-350 bar 20-240 bar 10-150 bar 5-70 bar
Repeatability deviation less than 1% (depending on the area of ??application)
Ambient temperature Ta allowed - 20 ° C to + 70 ° C
Hydraulic fluid mineral oil
Switching element miniature limit switch type 07-2501 (BARTEC)
Type of voltage AC voltage / DC voltage
Degree of protection DIN 60529 IP 65
Power connection cable, 4 m long
Housing painted aluminum
Pressure connection
Switching path approx. 0.5 mm - therefore very little wear on the seal and tappet guide
Piston diameter
Profile contact made of pure silver, on request profile contact gold coated on silver palladium
Type piston spring-loaded, a mechanical stop prevents the spring from turning on-block
Connection thread G ¼ inside
Adjustment screw cap setting
Adjustment lock fixing cover
Any installation position
General
Hydraulic
Electrical
Other Information
Weight basic type 0.8 kg
P max. (Standard seal) 500 bar 500 bar 400 bar 200 bar
P max. (SS seal) 400 bar 400 bar - - 1)
Viscosity range 10 to 800 mm² / s
Load changes> 2x106
low-friction special seal 1)
Conductor cross section 0.75 mm²
Sealing outer jacket sealing
tension
Max. Omsche load
Switching capacity
