自2001年起提供工业备件与工程解决方案。
德国仓直发，全球快速配送
多种支付方式多种付款选项
Janitza 96 RM-EL Power Analyzer Or Technically Equivalent
技术数据表 / 产品文档
欢迎联系我们！我们会在 24 个工作小时内（不含周末及节假日）确认库存状态和预计交期。
产品描述
Janitza的产品（包括Janitza 96 RM-EL Power Analyzer Or Technically Equivalent）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Janitza零部件。即使Janitza 96 RM-EL Power Analyzer Or Technically Equivalent未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesPower Analyzer Or Technically Equivalent
General Net weight
265 g
Net weight (with attached connectors)
300 g
Device dimensions
approx. l = 42 mm, b = 97 mm, h = 100 mm
Service life of the backlight
40,000 hours (50% of initial brightness)
Transport and storage The following information applies for devices that are transported or stored in their original packaging.
Free fall 1m Temperature
K55 (-25 °C to +70 °C)
Relative humidity
0 to 90% RH
Ambient conditions during operation The UMG 96RM is intended for use in weather-protected, fixed locations.
Protection class II according to IEC 60563 (VDE 0106, part 1).
Rated temperature range K55 (-10 °C .. +55 °C) Relative humidity
0 to 75 % RH
Operational altitude
0 .. 2000 m above sea level
Degree of pollution
2
Installation position
any
Ventilation
Forced ventilation is not required.
Foreign body and water protection
- Front
- Back
- Front with seal
IP40 according to EN60529 IP20 according to EN60529 IP54 according to EN60529
Power supply voltage Option 230V
Option 24V
Nominal range Power consumption
90V - 277V (50/60Hz) or DC 90V - 250V; 300V CATIII max. 7.5VA / 4W
Nominal range
24V - 90V AC / DC; 150V CATIII
Power consumption
max. 3.5VA / 2W
Operating range
+-10% of nominal range
Internal fuse, not replaceable
Typ T1A / 250V/277V according IEC 60127
Recommended overcurrent protection device for line protection (certified under UL)
Option 230V:
Option 24V:
(Char. B)
6 - 16A 1 - 6A
Recommendation for a maximum number of devices on a circuit breaker:
Option 230V : Circuit breaker B6A: max. 4 devices / Circuit breaker B16A: max. 11 devices
Option 24V : Circuit breaker B6A: max. 3 devices / Circuit breaker B16A: max. 9 devices
Connection capacity of the terminals (power supply) Connectable conductor. Only one conductor may be connected per contact point!
Single-wire, multi-wire, finely stranded conductor 0.2 - 2.5mm2, AWG 26 - 12
Pin terminals, ferrules
0.2 - 2.5mm2
Tightening torque
0.4 - 0.5Nm
Stripping length
7mm
02/2019 • Data sheet UMG 96RM – 3
UMG 96RM
TECHNICAL DATA
265 g
Net weight (with attached connectors)
300 g
Device dimensions
approx. l = 42 mm, b = 97 mm, h = 100 mm
Service life of the backlight
40,000 hours (50% of initial brightness)
Transport and storage The following information applies for devices that are transported or stored in their original packaging.
Free fall 1m Temperature
K55 (-25 °C to +70 °C)
Relative humidity
0 to 90% RH
Ambient conditions during operation The UMG 96RM is intended for use in weather-protected, fixed locations.
Protection class II according to IEC 60563 (VDE 0106, part 1).
Rated temperature range K55 (-10 °C .. +55 °C) Relative humidity
0 to 75 % RH
Operational altitude
0 .. 2000 m above sea level
Degree of pollution
2
Installation position
any
Ventilation
Forced ventilation is not required.
Foreign body and water protection
- Front
- Back
- Front with seal
IP40 according to EN60529 IP20 according to EN60529 IP54 according to EN60529
Power supply voltage Option 230V
Option 24V
Nominal range Power consumption
90V - 277V (50/60Hz) or DC 90V - 250V; 300V CATIII max. 7.5VA / 4W
Nominal range
24V - 90V AC / DC; 150V CATIII
Power consumption
max. 3.5VA / 2W
Operating range
+-10% of nominal range
Internal fuse, not replaceable
Typ T1A / 250V/277V according IEC 60127
Recommended overcurrent protection device for line protection (certified under UL)
Option 230V:
Option 24V:
(Char. B)
6 - 16A 1 - 6A
Recommendation for a maximum number of devices on a circuit breaker:
Option 230V : Circuit breaker B6A: max. 4 devices / Circuit breaker B16A: max. 11 devices
Option 24V : Circuit breaker B6A: max. 3 devices / Circuit breaker B16A: max. 9 devices
Connection capacity of the terminals (power supply) Connectable conductor. Only one conductor may be connected per contact point!
Single-wire, multi-wire, finely stranded conductor 0.2 - 2.5mm2, AWG 26 - 12
Pin terminals, ferrules
0.2 - 2.5mm2
Tightening torque
0.4 - 0.5Nm
Stripping length
7mm
02/2019 • Data sheet UMG 96RM – 3
UMG 96RM
TECHNICAL DATA
常见问题
关于Janitza品牌Janitza 96 RM-EL Power Analyzer Or Technically Equivalent产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Janitza的Janitza 96 RM-EL Power Analyzer Or Technically Equivalent。
Imtek Engineering通过可信赖的供应渠道采购正品Janitza产品，并以具有竞争力的价格向United States客户提供。
