自2001年起提供工业备件与工程解决方案。
德国仓直发，全球快速配送
多种支付方式多种付款选项
Lamtec VC100 Modular Boiler Control System
技术数据表 / 产品文档
| 品牌 |  |
| 类别 | 其他 |
| 产品名称 | Lamtec VC100 Modular Boiler Control System |
| 产品编号 | 未指定 |
欢迎联系我们！我们会在 24 个工作小时内（不含周末及节假日）确认库存状态和预计交期。
产品描述
Lamtec的产品（包括Lamtec VC100 Modular Boiler Control System）通过平行进口渠道采购，并快速可靠地交付给United States的客户。Imtek Engineering以具有竞争力的价格提供正品Lamtec零部件。即使Lamtec VC100 Modular Boiler Control System未在我们的网站上列出，您也可以随时申请报价——我们的团队将迅速响应并为您提供专属报价。
United StatesModular Boiler Control System
LAMTEC | VC10
Relative operating mode:
Two setting values - delta and hysteresis - are available.
For the switch-off point, the delta is added to the active setpoint of the firing rate controller and for the switchon point, the hysteresis is subtracted from the switch-off
point.
Example (setpoint 80 °C, delta 10 K, hysteresis 20 K): This results in a switch-off point of 90 °C and a
switch-on point of 70 °C.
Power control for a burner with one component The output control includes a digital controller for
controlling the boiler pressure/boiler temperature.
The setpoint can be set to ‘Fixed’ or specified by a time programme/analogue input. A manual setting and a
load limit are available. It is also possible to activate different start-up ramps.
Time programme:
This function can be used to replace the setpoint of the firing rate controller with a default value at a specific
time window. To do this, these time windows and default values must be set and activated. Outside of active
time windows, the setpoint firing rate is active.
Boiler level control with two feed water pumps with automated pump change and binary water level
detection.
A feed water pump is switched on when the water level falls to ‘Water level below’. If the „water level at top“
is exceeded, the feed water pump is blocked and only switched on again when the „water level at bottom“ is
reached. If the water level in the feed water tank is too low, the feed water pump is forcibly stopped.
An automatic pump change depending on the operating hours and an adjustable running time ratio is guaranteed. The pump is only changed via the pump status
„OFF“. When using fault and operating message, the system automatically switches to the redundant pump
in the event of a pump fault. The function is only active with plant „On“.
Blowdown control The blowdown control system realises an automatic blowdown of the boiler. This removes impurities from
the boiler tank at regular intervals.
For this purpose, the blowdown valve is activated in an adjustable pulse-pause ratio. The function is only active
with plant „On“.
Overall efficiency (ETA) The overall efficiency is calculated from the active losses
and the performance data. The data/constants must be set correctly for the individual loss calculations.
The desalting and blowdown losses can only be activated for the steam boiler system type. The
efficiency calculation is only available with active flue gas temperature measurement.
Steam boiler analogue The following functions are included:
Steam boiler binary The following functions are included:
Boiler level control with a feed water pump and binary water level detection
Boiler level control with two feed water pumps with automated pump change and binary water level
detection Blowdown control
Niveausteuerung Kessel mit einer Speisewasserpumpe und binärer Wasserstandserfassung
The feed water pump is switched on when the water level falls to ‘Water level below’. If the „Water level at top“
is exceeded, the feed water pump is blocked and only switched on again when the „Water level at bottom“ is
reached. If the water level in the feed water tank is too low, the feed water pump is forcibly stopped. The function is only active with plant „On“.
4
Boiler level control with one feed water pump and analogue water level detection
Boiler level control with two feed water pumps with automated pump change and analogue water level
detection Level control via TPS control valve and a feed water pump Level control via TPS control valve and two feed
water pumps with automated pump changeover Conductance control via TPS control valve
Blowdown control with overfill protection
Boiler level control with a feed water pump and analogue water level detection
The „Water level down“ and „Water level up“ switching points can be freely preselected between 0 and 100%.
The feed water pump is switched on when the water level falls to „Water level below“. If the „Water level above“
is exceeded, the feed water pump is blocked and only switched on when the „Water level above“ is reached.
If the water level in the feed water tank is too low, the feed water pump is forcibly stopped. The function is only
active with plant „On“.
Relative operating mode:
Two setting values - delta and hysteresis - are available.
For the switch-off point, the delta is added to the active setpoint of the firing rate controller and for the switchon point, the hysteresis is subtracted from the switch-off
point.
Example (setpoint 80 °C, delta 10 K, hysteresis 20 K): This results in a switch-off point of 90 °C and a
switch-on point of 70 °C.
Power control for a burner with one component The output control includes a digital controller for
controlling the boiler pressure/boiler temperature.
The setpoint can be set to ‘Fixed’ or specified by a time programme/analogue input. A manual setting and a
load limit are available. It is also possible to activate different start-up ramps.
Time programme:
This function can be used to replace the setpoint of the firing rate controller with a default value at a specific
time window. To do this, these time windows and default values must be set and activated. Outside of active
time windows, the setpoint firing rate is active.
Boiler level control with two feed water pumps with automated pump change and binary water level
detection.
A feed water pump is switched on when the water level falls to ‘Water level below’. If the „water level at top“
is exceeded, the feed water pump is blocked and only switched on again when the „water level at bottom“ is
reached. If the water level in the feed water tank is too low, the feed water pump is forcibly stopped.
An automatic pump change depending on the operating hours and an adjustable running time ratio is guaranteed. The pump is only changed via the pump status
„OFF“. When using fault and operating message, the system automatically switches to the redundant pump
in the event of a pump fault. The function is only active with plant „On“.
Blowdown control The blowdown control system realises an automatic blowdown of the boiler. This removes impurities from
the boiler tank at regular intervals.
For this purpose, the blowdown valve is activated in an adjustable pulse-pause ratio. The function is only active
with plant „On“.
Overall efficiency (ETA) The overall efficiency is calculated from the active losses
and the performance data. The data/constants must be set correctly for the individual loss calculations.
The desalting and blowdown losses can only be activated for the steam boiler system type. The
efficiency calculation is only available with active flue gas temperature measurement.
Steam boiler analogue The following functions are included:
Steam boiler binary The following functions are included:
Boiler level control with a feed water pump and binary water level detection
Boiler level control with two feed water pumps with automated pump change and binary water level
detection Blowdown control
Niveausteuerung Kessel mit einer Speisewasserpumpe und binärer Wasserstandserfassung
The feed water pump is switched on when the water level falls to ‘Water level below’. If the „Water level at top“
is exceeded, the feed water pump is blocked and only switched on again when the „Water level at bottom“ is
reached. If the water level in the feed water tank is too low, the feed water pump is forcibly stopped. The function is only active with plant „On“.
4
Boiler level control with one feed water pump and analogue water level detection
Boiler level control with two feed water pumps with automated pump change and analogue water level
detection Level control via TPS control valve and a feed water pump Level control via TPS control valve and two feed
water pumps with automated pump changeover Conductance control via TPS control valve
Blowdown control with overfill protection
Boiler level control with a feed water pump and analogue water level detection
The „Water level down“ and „Water level up“ switching points can be freely preselected between 0 and 100%.
The feed water pump is switched on when the water level falls to „Water level below“. If the „Water level above“
is exceeded, the feed water pump is blocked and only switched on when the „Water level above“ is reached.
If the water level in the feed water tank is too low, the feed water pump is forcibly stopped. The function is only
active with plant „On“.
常见问题
关于Lamtec品牌Lamtec VC100 Modular Boiler Control System产品的常见问题。Imtek Engineering随时准备帮助您在United States采购Lamtec的Lamtec VC100 Modular Boiler Control System。
Imtek Engineering通过可信赖的供应渠道采购正品Lamtec产品，并以具有竞争力的价格向United States客户提供。
